CTM - NAVIARA TM Hi-Capa 4.3 CNC Split Slide - Black (Inc. Enhanced Nozzle, Short Stroke Kit, Springs + More)

Material: 6061 Aluminium Weight: 140g Colour: Black The 4.3 version of CTM's NAVIARA split slide for the Tokyo Marui Hi-Capa. Only the rear section of the slide moves; the outer barrel stays fixed, so the moving weight is low, the gun cycles fast and a red dot on the integrated optic plate stays on the barrel rather than riding the slide. Like the 5.1 NAVIARA, it comes as a complete kit. Features High-precision 6061 CNC aluminium. Split-slide and fixed barrel design, lightweight and agile. TDC wheel for easy, precise hop adjustment, with an enlarged pressure nub. Detachable ambidextrous charging handle. Integrated optic plate on the outer barrel for an absolute co-witness sight picture. 11mm muzzle with a 14mm CCW to 11mm CW stainless steel adapter and a thread cap. Note: take out the set screw before removing the thread adapter. Half-ghost ring sight, and compatible with Tokyo Marui original iron sights. Compatible with the original Tokyo Marui 5.1 / 4.3 spec middle frame. Short stroke kit, enhanced nozzle and 180% enhanced nozzle spring included. Note: always install the short stroke kit with the NAVIARA. Non-tilting block design stops the outer barrel tilting. Curved rear serrations for racking by hand or with the charging handle. Removable stainless steel slide stop. Package Contents CNC Superline 4.3 outer barrel x1 (with steel 11mm CW to 14mm CCW thread adapter, thread protector, front sight, TDC hop adjust wheel + hardware, cover plate, spare RMR screws) CNC NAVIARA 4.3 recoil spring guide plug x1 CNC steel guide rod x1 Enhanced Nozzle Set For TM Hi-Capa x1 180% enhanced nozzle spring x1 CNC NAVIARA 4.3 slide x1 (with stainless steel slide stop + set screws) CNC rear sight mount set x1 CNC superlight charging handle x1 (left/right interchangeable, with screws and steel gaskets) Non-tilting block x5 2mm x 20mm optic fibre stick x3 CNC short stroke buffers 5mm x1 and 10mm x1 Nylon washer 1mm x3 Assorted spare parts (TDC rubber ring, 2.5mm steel ball, front sight screws, nozzle housing screw) Allen keys: M0.9, M1.27, M1.5, M2, M2.5 Fitting notes: with some aftermarket nozzle housings, about 2mm may need removing from the charging handle screw, so CTM recommend a qualified tech for that. The outer barrel doesn't touch the middle frame, so a slight wobble is normal. Please note this product is not fully compatible with the Tokyo Marui Hi-Capa 5.1 / 4.3 D.O.R models. For optimal fit and performance, use with the following Tokyo Marui platforms: Hi-Capa 4.3 Tactical Custom Hi-Capa 4.3 Dual Stainless Hi-Capa 5.1 Government Model, Gold Match, Stainless and Silver CTM part number: CTM-HUR-1400