1970-72 Chevelle Hidden Wiper System with Delay

Get the wiper motor off the firewall. This hidden wiper system for 1970-72 Chevelles mounts the motor and linkage inside the cowl, out of sight, and a supplied cover plate closes the factory motor opening. The result is a clean firewall for a finished engine bay. Sold in the 2-speed with delay configuration. A rotary switch replaces the factory slider switch in the dash. Features Wiper motor and linkage mount inside the cowl, not on the firewall Cover plate closes the factory motor opening in the firewall Rotary delay switch with firm click stops for Off, Intermittent, Low and High Push the knob to run the washers and the wipers cycle twice on their own (with a washer system installed) Aluminum wiper knob and dash adapter plate included Includes wiring harness, harness grommet, heat-shrink connectors and mounting hardware Fitment 1970, 1971 and 1972 Chevelle Choose your model year and dash (Base or SS). The switch adapter plate is different for each dash. Replaces the factory wiper motor, switch and wiring. Only the 12V feed from the fuse panel is reused. This system hides the motor, not the arms. The wiper arms and blades rest at the bottom of the windshield, just above the trim. Cars that came with factory hidden wipers need two passenger-side wiper arms and blades. Installation Space inside the cowl is tight. Removing the hood first is recommended. Requires drilling a 5/8" hole in the cowl floor for the harness grommet, plus a small hole for the motor brace (through two layers of sheet metal on 1970-72 cars). Wire to 12V through a 5-amp fuse. The delay switch must be well grounded. Weight: 12 lbs