DCC NeoChroma S-44100+ Pro Sublimation Printer

The DCC NeoChroma S-44100+ Pro is the entry point into DCC’s industrial dye-sublimation line — a 64-inch transfer printer built on a single Epson I3200-A1 printhead, with a 5 L bulk ink system, quartz curing and a 7-inch touchscreen. DCC publishes 48.61 m²/hr (about 523 sq ft/hr) at 360 × 600 dpi, and up to 720 × 1200 dpi in four-pass mode when the work needs detail rather than speed. It is the model for a shop moving off desktop sublimation or bringing outsourced transfer printing in-house — industrial paper handling and bulk ink at the bottom of the range, in a series that scales to four heads. 48.61 m²/hr — 523 sq ft/hr at 360 × 600 dpi Up to 720 × 1200 dpi — four-pass mode for detail work Epson I3200-A1 printhead — auto capping and wiping for longer head life 64″ media width — 1625 mm, down to 42 gsm paper 5 L bulk CMYK tanks — plus 220 mL secondary tanks — refill without stopping Four quartz heaters — intelligent curing, auto and manual control Auto load and take-up — double air-shaft, wrinkle removal and tensioner roller 7″ touchscreen HMI — setup, adjustment and monitoring in one place Built to order and shipped by freight. Crating, installation and lead time are confirmed at quote. Equipment financing is available, and Section 179 tax advantages may apply. Call (512) 454-0505 or message us on Tidio with your volume and floor space and we will tell you whether this is the right model in the series.