ASI - 20477-SM Roval™ Surface Mounted Toilet Seat Cover Dispenser

ASI - 20477-SM Roval™ Surface Mounted Toilet Seat Cover Dispenser Dispenses 250 seat covers. Fabricated of 20 gauge type 304 stainless steel with a satin finish. Covers are self-feeding until supply is depleted. Unit is manually reloaded with a full box through concealed opening in bottom on schedule determined by maintenance requirements. Stainless Steel Construction Our heavy-duty items are made of high-quality 304 stainless steel, which is tough, durable, stain-resistant and easy to clean. Tumbler Locks Our tumbler locks provide convenience and security with an elegant look. Staked Piano Hinges Our heavy-duty, staked piano hinges provide security and a neat appearance, and they stand up to heavy use. Removable Waste Receptacle Fully removable waste cans allow contents to be easily discarded for efficient ongoing maintenance and cleanliness. Features Dispenses 250 seat covers 20 gauge type 304 stainless steel construction Satin finish Surface mounted Curved front adds strength and elegance Concealed, multi-staked piano hinge Covers are self-feeding until supply is depleted Concealed bottom opening allows manual reloading Specifications Model 20477-SM Series Roval™ Type Surface Mounted Toilet Seat Cover Dispenser Dimensions 15-3/4″ x 11″ x 2-3/8″ (400 x 280 x 60 mm) Construction 20 gauge Type 304 Stainless Steel Finish Satin Finish Mounting Surface Mounted Capacity Dispenses 250 seat covers Hinge Concealed, Multi-Staked Piano Hinge Finishes Satin Finish Operation & Maintenance Covers are self-feeding until supply is depleted. Unit is manually reloaded with a full box through concealed opening in bottom on schedule determined by maintenance requirements. Regularly inspect and replenish the supply of toilet seat covers according to facility maintenance requirements. Clean stainless steel surfaces regularly with a soft clean rag moistened with a mild detergent, followed by a water-moistened clean rag and then a dry rag. Installation Mount unit on wall or partition surface using two (2) #10 x 1-1/4″ [32] self-threading flat head screws (by others). Mounting holes are accessible through the dispenser slot during installation and are concealed behind the dispenser box after the dispensing product is loaded for vandal-resistant installation. For compliance with 2010 ADA Accessibility Standards, install unit so that centerline of dispenser slot is 48″ [1219] maximum Above Finished Floor (AFF) if clear floor access is provided. Where only side reach over an obstruction is provided, such as over a vanity, centerline of dispenser slot should be 46″ [1168] maximum AFF. Downloads Product Care & Maintenance Technical Data Sheet – 20477-SM