AMICTUS Pendant

One sheet wraps once around the light, and a little further. Its edge overlaps itself and stays open. One groove runs all the way round, near the rim. AMICTUS is designed and made in our studio in Germany. The matte mineral surface reads like stone by day and glows softly when the light is on. Every AMICTUS is numbered. The Kay Galerie mark and the serial number are engraved inside the shade, under the top, next to the socket. Details Size: 220 mm high, 139 x 149 mm across (160 mm across the outer edge of the sheet) Shade: matte PLA with a stone-like texture. The sheet is 8 mm thick. The shade is one piece, with a flat top and one round hole for the socket. Colours: Bone, Beige, Stone, Olive, Navy (all matte) Fits a standard E27 pendant cord set. The shade rests on the lower ring of the socket. The cord set is not included. For LED bulbs only: E27, globe up to 60 mm diameter Numbered edition, product code KG-P14, serial number engraved inside the top Made to order in our studio in Germany Installation Switch off the power at the fuse box and check that the wires are dead. A qualified electrician should connect the light to the ceiling wiring. On a table, unscrew the lower ring from the socket of your cord set. Pass the socket down through the hole in the top of the shade. Screw the ring back onto the socket, below the top. The shade rests on the ring and hangs level. Screw in an E27 LED bulb (globe, up to 60 mm diameter). Hang the cord set and connect it as described in its own instructions. Switch the power back on. Changing the bulb Switch the light off and let the bulb cool. Lift the shade about 25 cm up the cord. Change the bulb. Let the shade slide back down onto the ring. Leave about 25 cm of free cord above the shade for this. Care and safety Use LED bulbs only. Never use halogen or incandescent bulbs. The shade is made of plastic and must not get hot. The shade rests on the ring and is not locked to it. Do not pull or push the shade upward while the light is hanging. For dry indoor rooms only. Dust with a soft, dry brush. Do not use water or cleaning products. Keep away from open flames and heat sources. Maker: Kay Galerie, Poststrasse 12, 88677 Markdorf, Germany, info@kaygalerie.com