Toray RO Membrane TMH20A-400C (Màng RO Áp Thấp Toray)

A reverse osmosis membrane is also used for processing desalted and/or Ultra Pure Water (UPW) for various industrial and other uses, such as making up water from power plants, manufacturing of electronic chips, food industry, pharmaceutical, medical, and others. An Vi Group is a proud supplier of high quality membranes from top-rated reverse osmosis membrane manufacturing brands such as Dupont/Dow Filmtec, Nitto Denko Hydranautics, Toray, Veolia (Suez), LG Chem H2O, Aquaporin… These membranes come in sizes ranging from 4″, and 8″ for brackish water and seawater applications. An Vi Group introduces to customers RO membrane Toray TMH20A-400C designed and manufactured by Toray. This type of Reverse osmosis plant managers and operators dealing with controlled-pre-treatment waters and seeking advanced membrane treatment with good water purity. 1. Key Features RO Toray TMH20A-400C: Toray’s reverse osmosis membrane technology applies decades of R&D and precision automated manufacturing under ISO 9001 for consistency in product quality. State-of-the-art cross-linked fully aromatic polyamide composite membranes produce high-quality permeate and robust membrane chemistry for improved performance and longer membrane life. 2. Key Applications Toray RO Elements: Municipal drinking water Industrial process water Water reuse 3. Typical Properties Toray TMH20A-400C: Model: TMH20A-400C Active Area ft2 (m2) 400 (37) Feed Spacer Thickness (mil) 34 Permeate Flow Rate gpd (m3/d) 11,000 (41.6) Stabilized Salt Rejection (%) 99.3 Minimum Salt Rejection (%) 99.0 Conditions test Toray TMH20A-400C: Feed water pressure 100 psi (0.69 MPa); Feed water temperature 77 °F (25°C); Feed water concentration 500 mg/L as NaCl; Recovery rate 15%; Feed water pH 7 4. Suggested Operating Conditions Toray TMH20A-400C: Maximum Operating Temperature 113 (45) F (°C) Maximum Operating Pressure 365 (2.5) psi (MPa) Maximum Pressure Drop Per Element Per Pressure Vessel (Minimum 4 Elements) 15 (0.10) psi (MPa) 50 (0.34) psi (MPa) pH Range Continuous Operation Short-Term Cleaning (30 min.) 2-11 1-12 Maximum Feed Water SDI 5 5. General Information about operating for Toray RO elements: Please consult the latest Toray technical bulletin, design guidelines, computer design program, or call an application specialist for the recommended design range. Not strictly following the operating limits stated in this bulletin will void and nullify the Limited Warranty. All RO elements are wet tested treated with a 1 percent by weight sodium bisulfite storage solution. Afterward, the RO elements are vacuum packed in oxygen barrier bags or treated with a tested feed water solution, and then vacuum sealed in oxygen barrier bags with deoxidant inside. Toray recommends flushing Toray RO elements for 30 to 60 minutes once every two days with sufficient quality flushing water, such as pre-treated feed water, to prevent biological growth during system shutdown. Please refer to the Toray RO Handling Manual for suggested flushing water quality. The presence of free chlorine and other oxidizing agents under certain conditions, such as heavy metals that act as oxidation catalysts in the feed water, will cause unexpected oxidation of the membrane. Toray strongly recommends removing these oxidizing agents contained in feed water before operating the RO system. Permeate from the first hour of operation shall be discarded. The customer is fully responsible for the effects of chemicals that are incompatible with the elements. Maximum operating pressure will vary depending on feed temperature. Please ask for detailed information from Toray/ An Vi Group if needed. Kindly contact with An Vi Group: An Vi Group is specialized in designing & commercial & industrial reverse osmosis (RO) water treatment and purification systems for over 15 years. We engineer & build custom and turn-key water treatment & purification systems including water softeners, waste water treatment, sewage treatment, RO water filtration, UV water purification, reverse osmosis plants, brackish & tap water reverse osmosis systems, sea water reverse osmosis systems, ultrafiltration systems, RO cleaning skids, cartridge filters housing, deionizers, containerized equipment, electrodeionization units. All of our systems are engineered & manufactured in Vietnam. Address: 170/8B Vuon Lai Str, Phu Tho Hoa Ward, Ho Chi Minh City, Vietnam. Kindly, contact to An Vi Group for consultion and buying Toray RO TMH20A-400C designed and manufactured by Toray. Tell: +84 28 6651 8768 Sales : +84 964 267 595 WhatsApp/ Zalo/ Wechat: +84 964 26 7595 Email : bichvi@anvigroup.com.vn Email : info@anvigroup.com.vn