Pullman Genuine HEPA 13 Filter for AS4, AS4H, PC4 and PC4+

As a vacuum is used, fine dust gradually collects in its filters. When the HEPA cartridge becomes heavily loaded, air has more difficulty passing through it. Replacing a worn or blocked filter helps remove that restriction and keeps the machine's filtration system working as intended. This genuine Pullman HEPA 13 filter, part number 32200621, is the replacement cartridge for selected AS4, AS4H and PC4 vacuum cleaners. The round cartridge contains pleated HEPA filter media, which captures fine particles as air passes through the filter. Its pleated construction provides a larger filtering surface within the cartridge. This is a separate component from the vacuum's dust bag and reusable cloth canister filter. Which Pullman Vacuums Use Filter 32200621? This filter suits Pullman AS4 Version 1 and Version 2, AS4H Version 1, and the PC4 family, including PC4, PC4.0 and PC4+ HEPA models. Pullman machines have been sold in different versions, so check the model identification on your vacuum before ordering. The part number to match is 32200621. Filter Specifications and Package Contents The cartridge is a genuine Pullman part with HEPA 13 filtration classification. It has a cylindrical pleated filter body with moulded end fittings. The package contains one HEPA 13 filter cartridge. Dust bags and the separate cloth canister filter are not included. When to Replace the HEPA Filter Check the cartridge regularly, especially when the vacuum is used for frequent dry cleaning. Dust trapped in the filter can restrict airflow over time. Before inspecting or replacing the filter, switch off the vacuum and unplug it. Follow the machine's instructions for removing the filter. Loose surface dust may be removed gently with a soft brush where the manual permits, but a damaged or persistently blocked cartridge should be replaced. Always operate the vacuum with the required filters and dust bag correctly fitted. Important Information for Older PC4 and PC4.0 Models Older Pullman PC4 and PC4.0 machines were supplied without a separate HEPA cartridge. Their original parts information identifies a framed cloth filter, Pullman part number 32200397. If your machine was originally supplied without HEPA filtration, this cartridge is not a direct-fit replacement. Do not assume it can be installed without modifications. Some newer PC4.0 machines have HEPA filtration, so check the existing filter and its part number rather than relying on the PC4.0 name alone. For an older machine requiring the framed cloth filter, see our Pullman PC4 and AS4 15L Cloth Filter in Frame. For other replacement parts, browse our Pullman vacuum cleaner spare parts range.