Banjo M350 Pump Head with Hydraulic Motor 11gpm

The new M350 pump saves money in spraying operations. Hydraulic motor Specifications-HY11131A Max HYD Pressure:3000 PSI Max Speed: 3600 RPM Max HYD Flow: 11gpm Typical HYD Pressure: 200-2600psi Port Sizes: Inlet Port SAE 10 (7/8-14UNF-2B) Outlet Port SAE 10 (7/8-14UNF-2B) Case Drain Port SAE 04 (7/16-20UNF-2B Connection Information: “A” Port – To Tank (Outlet) “B” Port – Pressure (Inlet) Case Drain Port – To Tank (Outlet) • Because this is a bi-directional motor, reversing “A” and “B” ports will not damage the motor. No check valve is required. • Case drain must not be restricted. Back-pressure above 4.3 psi may damage motor seals. M350 FastFlow™ technology utilizing a customized diffuser design greaty increases flow rates. With performance over 500 gallons per minute (Plumbed 4" Suction) , you'll spend less time filling, which means less downtime in the field and most importantly, less cost per acre. Patented tandem wet seal design: Produces less wear Prevents seal breakage from high pressure clean out Eliminates eight leak points Works with natural system pressure to keep seal intact Withstands over one hour of dry run 3" Plumbing 450gpm 4' Plumbing 515gpm M300 Inlet and Outlet Does not include Chamber Fluid (Glycol) for Wet Seal 500+ Gallons per Minute Polymer components molded from polypropylene EPDM seals All stainless steel hardware Tandem wet seal design Produces less wear Prevents seal breakage from high pressure clean out Eliminates eight leak points Works with natural system pressure to keep seal intact No exposed moving parts Typical operating speed: 3600 RPM Run dry capability of greater than one hour. Capable of handling occasional solid particles in suspension up to ½" in diameter. Maximum self-priming height 25 ft (7.6 m) for hydraulic version (0.422" priming hole); 28 ft (8.5 m) for standard version (0.250" priming hole)