Front Left & Right Drive Shafts Pair for Renault Captur 1.5 dCi Manual (2013-On) – OE 391000367R / 391010474R

Check part compatibility by using our vehicle filter options below. If you find your car, this part is compatible. Check Compatibility Compare OE Numbers Front Left & Right Drive Shafts Pair for Renault Captur 1.5 dCi Manual (2013-On) – OE 391000367R / 391010474R A pair of front driveshafts (left and right) for the Renault Captur 1.5 dCi (K9K engine, 86/90/110 HP) with manual gearbox, from 2013 onwards – OE references 391000367R and 391010474R. The right-hand shaft is 915 mm and the left-hand shaft 695 mm. Each has 25 splines at the wheel side, 26 splines at the gearbox (differential) side and an M20 x 1.5 thread. Replacing both sides together deals with worn CV joints on either side in one job. OE / OEM Numbers Compare the Renault part numbers on your old driveshafts before ordering. 391000367R 391010474R Check Compatibility Before Ordering Compare your vehicle details and OE number before ordering. Check your Captur is a 1.5 dCi diesel with a manual gearbox, then find your variant below. Compare the part numbers on your old shafts with the OE/OEM numbers above, and check the lengths and spline counts. VehicleRenault Captur (J5_, H5_) 1.5 dCi, manual EnginesK9K – 86, 90 & 110 HP LengthsRight 915 mm · Left 695 mm SplinesWheel side 25 · Differential side 26 Years2013 onwards All our Front Left & Right Drive Shafts Pairs are OEM quality and reliable after market car parts. This Front Left & Right Drive Shafts Pair for Renault Captur 1.5 dCi Manual (2013-On) – OE 391000367R / 391010474R is specifically compatible with Renault: Captur. Compatible variants, engines, chassis and years: Renault Captur3 fitments · 2013–2024 Variant Type Engine Chassis Year Diesel Hatch 1.5 dCi 1461cc 63KW 86HP K9K 830 FWD I J5_,H5_ 2013-2024 Diesel Hatch 1.5 dCi 110 1461cc 81KW 110HP K9K 646;K9K 856 FWD I J5_,H5_ 2015-2024 Diesel Hatch 1.5 dCi 90 1461cc 66KW 90HP K9K 608;K9K 609;K9K 628;K9K 629;K9K 638;K9K 838 FWD I J5_,H5_ 2013-2024 Not sure it fits? If you are still not sure about the compatibility of this part with your vehicle, please supply us with the VIN number or Reg number in our live chat or contact form! Get Help With Fitment Product Specifications Product Front Drive Shafts Pair (Left & Right) Car Renault Fitting Position Front Axle Left & Right Length 915 mm Right & 695 mm Left Side Wheel-Side External Spline 25 Differential-Side External Spline 26 Thread Size M20 x 1.5 Quantity 1 (pair) Our SKU TR391000367R-TR39101474RPAIR_94 Important Information Before you order Please use our make-model-year tool to check this part's compatibility with your vehicle. However, please note that our tool is for reference only and we recommend that you check the part number on your old unit prior to purchasing. Key Features Left & Right Pair Both front driveshafts in one order – right 915 mm, left 695 mm. Matched Splines 25 splines at the wheel side and 26 at the differential side, with an M20 x 1.5 thread. For Captur 1.5 dCi Manual Listed for the K9K 1.5 dCi in 86, 90 and 110 HP versions from 2013. OE Referenced Replaces Renault OE 391000367R and 391010474R. Related Guides & Parts Read our driveshaft guideCV joint wear, clicking and vibration symptoms, and choosing the right shaft. Wheel hubs, bearings & sealsParts often checked at the same time as a driveshaft. Shop All Driveshafts FAQs Which Renault Captur models does this driveshaft pair fit? It is listed for the Renault Captur 1.5 dCi (K9K engine) in 86, 90 and 110 HP versions with a manual gearbox, from 2013 onwards. Check your variant in the compatibility section on this page. Does it fit the automatic (EDC) or petrol Captur? No – this pair is listed for the 1.5 dCi with manual gearbox only. Automatic (EDC) and petrol TCe versions are not listed. Send us your VIN or Reg number if you are unsure. Why are the left and right shafts different lengths? On front-wheel-drive cars the gearbox sits off-centre, so one shaft has to be longer than the other. On this pair the right shaft is 915 mm and the left shaft is 695 mm – measure your old shafts to compare. How can I check the splines match my car? Count the splines on your old shafts: this pair has 25 at the wheel (hub) end and 26 at the differential end, with an M20 x 1.5 thread. If the counts differ, it is not the right shaft for your car. What are the signs of a worn driveshaft? The most common sign is a clicking or knocking noise when turning at low speed, usually from a worn outer CV joint. Vibration under acceleration, a torn CV boot or grease sprayed around the wheel arch are also warning signs.