Q'Straint 2 QRT Max Retractors (L-Track) + 2 OMNI Floor Pockets | QMAXX2M-L

This set pairs two Q'Straint QRT Max retractors (knobless, self-locking, self-tensioning, L-Track fitting) with two OMNI Oval L-Track floor pockets — giving you two complete wheelchair tie-down positions ready to bolt into OMNI-approved L-Track anchorage. Occupant lap & shoulder belt and additional wheelchair positions are sold separately. SKU: QMAXX2M-L | VENDOR: Q'STRAINT 2 Q'Straint QRT Max Retractors (L-Track) + 2 OMNI Oval L-Track Floor Pockets | QMAXX2M-L ✔ Free Shipping 🔒 2-Point Tie-Down Set 🏷 Q'Straint Key Features 🎛 Knobless Operation No knobs to interfere with wheelchair wheels or footrests. Eliminates confusion about whether additional tightening is needed. 🔒 Automatic, Self-Locking Allows easy, one-handed hook-up of wheelchairs without a manual locking step. ⚙️ Self-Tensioning Automatically takes up slack — no manual tensioning required. 🟢 Positive Lock Indicator (PLI) Clearly indicates when the fitting is locked into the anchorage — eliminates guesswork for operators. 🔩 OMNI-Approved Floor Pockets Oval L-Track floor pockets accept Q'Straint and Sure-Lok retractor fittings, recessed flush with the floor to minimize tripping hazards. ↔️ Interchangeable No designated right, left, front, or rear positions — either retractor works at either point. What's Included Qty Component SKU 2 QRT Max Retractor (knobless) w/ PLI, L-Track Fitting Q8-6209-L 2 OMNI Oval L-Track Floor Pocket (bolt, washer & hex nut included) Q5-7571-A ⚠ Also required — not included: Occupant lap & shoulder belt. This set provides two wheelchair tie-down positions with matching floor anchorage only — it is not a complete 4-point WTORS kit. Full Feature Details Setting a New Standard in Retractor Systems The QRT Max is Q'Straint's premium self-locking, self-tensioning retractable wheelchair securement system. This fully automatic, knobless retractor is paired here with two OMNI Oval L-Track floor pockets, giving you the anchorage and retractors needed for two wheelchair tie-down positions in one order. Feature Description Knobless, One-Handed Operation No knobs to interfere with wheels and footrests — eliminates confusion as to whether additional tightening is required. Automatic, Self-Locking Allows easy, one-handed hook-up of wheelchairs. Self-Tensioning No manual tensioning required — retractors automatically take up slack to ensure the wheelchair passenger is always secured. Positive Lock Indicator Patented feature clearly indicates when the fitting is locked in the floor anchorage (L-Track application). Interchangeable Eliminates confusion — no designated right, left, front, or rear locations. Low Profile & Compact No mounting bracket required — retractors fit under most footrests. Universal Design Accommodates virtually all wheelchair designs, including scooters. Oval Floor Pocket Design Provides extra clearance for easy retractor fitting insertion and removal; recessed flush with the floor when not in use. OMNI-Approved Floor pockets are tested and certified for use with both Q'Straint and Sure-Lok retractor fittings. QRT Series Comparison — Which Retractor Is Right for You? Feature QRT Standar QRT Deluxe QRT Max Tensioning Single knob Dual knobs Knobless Automation Semi-automatic Fully automatic Fully automatic Self-Locking — ✓ ✓ Self-Tensioning — ✓ ✓ Warranty 2 years 3 years 3 years Best For Budget fleets Industry standard Max ease of use Vehicle Applications 🚐 Wheelchair-Accessible Van (WAV) 🚌 Paratransit / Minibus 🚑 Non-Emergency Medical Transport (NEMT) 🚌 School Bus 🚐 Sprinter / Transit Van 🚆 Rail / Community Transit Safety Standards & Certifications SAE J2249Wheelchair Tie-Down Systems for Motor Vehicles ISO 10542Wheelchairs — Tie-Down & Occupant Restraint Systems FMVSS 209Seat Belt Assemblies FMVSS 210Seat Belt Assembly Anchorages FMVSS 302Flammability of Interior Materials CSA Z605Wheelchair Securement in Motor Vehicles (Canada) ℹ️ ADA Compliance Note: This product is designed for use in ADA-accessible transportation applications. Verify that installation meets applicable ADA requirements for your specific vehicle type and use. For state-by-state compliance requirements and fleet documentation resources, visit our Compliance Resource Center. 🛡 Warranty (QRT Max retractors): 3-year limited. Registration required at qstraint.com for full coverage. Without registration, 1-year limited applies. ⚠ Warranty terms should be verified directly with the manufacturer. Warranty term for the OMNI floor pocket hardware could not be confirmed on the manufacturer or product page — verify with Q'Straint before publishing. California Prop 65 Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. See qstraint.com/prop-65 📄 Installation & User Guide: View Installation & User Guide List 📄 Product Documents: QRT Series Brochure (PDF) Specifications Specification Detail Brand Q'Straint (retractors) / OMNI (floor pockets) SKU QMAXX2M-L Components 2 × Q8-6209-L, 2 × Q5-7571-A Price $411.80 per set Shipping Free Shipping Warranty 3-year limited* (retractors) — see note above Use / Installation Retractors require no special tools for daily use. Floor pockets must be professionally installed by a qualified WAV modifier. Frequently Asked Questions Does this set include everything for one wheelchair position? + This set includes two QRT Max retractors and two matching OMNI floor pockets — enough for two wheelchair tie-down points. It does not include an occupant lap & shoulder belt, which is required to complete a securement position and is purchased separately. Is professional installation required? + The retractors connect to existing floor anchorage and require no special tools for daily use. The OMNI floor pockets must be installed by a qualified WAV modifier or certified accessibility vehicle technician. Can I mix Q'Straint and Sure-Lok hardware with this set? + The OMNI floor pockets are certified for both Q'Straint and Sure-Lok fittings. However, every retractor within a single wheelchair position must be from the same brand — Q'Straint or Sure-Lok — never mixed at one position. Do I need to register this product for the full warranty? + Yes — registration at qstraint.com is required for full warranty coverage on the QRT Max retractors. Without registration, 1-year limited coverage applies. Related Products 🔄 QRT Max Replacement Retractor L-Track | Q8-6209-L $174.95 🔩 OMNI Oval L-Track Floor Pocket | Q5-7571-A $25.00 📦 4 QRT Max Retractors w/ Manual Lap & Shoulder Belt | Q-8300-A-L View Price 🪢 Occupant Lap & Shoulder Belts Multiple options Not sure which occupant belt or vehicle configuration you need? Tell us your vehicle type and wheelchair positions — we'll help you complete the securement system. 📞 800.884.6456 ✉ Email Us Contact Form