Acoustic Energy AE320² Floorstanding Speaker (Pair)

Acoustic Energy Acoustic Energy AE320² Floorstanding Speaker (Pair) Three-Way Floorstanding Loudspeakers • Corinium-Derived Driver Technology • Paper and Coconut-Fibre Cones • 29mm Soft-Dome Tweeter • RSC Constrained-Layer Cabinets • Aluminum Outrigger Feet Acoustic Energy AE320² Floorstanding Speakers for Powerful, Natural Full-Range Sound The Acoustic Energy AE320² Floorstanding Speaker (Pair) is the range-topping floorstander in the redesigned 300 Series, combining a three-way driver array with technology developed during Acoustic Energy’s flagship Corinium project. Designed for medium-to-large listening rooms, the AE320² delivers high sensitivity, deep bass extension and expansive scale while maintaining the clarity, timing and energetic musical character associated with Acoustic Energy loudspeakers. A dedicated 120mm midrange driver and two 140mm bass drivers use newly developed paper and coconut-fibre cones for a balance of stiffness, low mass and natural damping. These drivers are paired with a Corinium-derived 29mm soft-dome tweeter and installed in an 18mm constrained-layer RSC MDF/bitumen cabinet. Rear slot and midrange ports, aluminum outrigger feet and supplied spike covers complete a carefully engineered design built for stable imaging, clean dynamics and room-filling performance. Highlights & Benefits True Three-Way Driver Architecture — A dedicated midrange driver and twin bass drivers allow each part of the frequency range to be reproduced by a purpose-selected transducer. Corinium-Derived Technology — Driver, tweeter and cabinet developments informed by Acoustic Energy’s flagship loudspeaker project bring premium engineering to the 300 Series. High 92dB Sensitivity — Efficient operation helps the AE320² produce strong dynamics and room-filling output with a wide range of compatible amplifiers. Deep 30Hz Bass Extension — Twin 140mm bass drivers and a carefully tuned rear slot port deliver substantial low-frequency weight without sacrificing speed or definition. Floor-Friendly Aluminum Feet — Solid aluminum outriggers, spikes and protective spike covers provide a wide, stable foundation on carpeted or hard flooring. Technology & Design Paper and Coconut-Fibre Drivers — The Acoustic Energy AE320² Floorstanding Speaker (Pair) uses cone material developed through research from the Corinium project. Paper provides a naturally balanced tonal character, while coconut fibres reinforce the cone to improve stiffness and help reduce unwanted breakup modes. 29mm Soft-Dome Tweeter with WDT Waveguide — The newly developed fabric-dome tweeter uses a neodymium ring magnet, a vented and copper-shielded pole structure, and a contoured rear chamber filled with graded absorption material. Acoustic Energy’s Wide Dispersion Technology waveguide helps control baffle diffraction and maintain a broad listening area. RSC Constrained-Layer Cabinet — The enclosure uses 18mm MDF combined with a bitumen damping layer to form Acoustic Energy’s Resonance Suppression Composite construction. This constrained-layer approach reduces panel vibration and cabinet coloration so the drivers can operate against a quieter mechanical background. Separate Midrange and Bass Porting — A rear slot-shaped duct supports the twin bass drivers while reducing turbulence and audible port noise. The dedicated midrange section is independently tuned, helping the AE320² produce an open, spacious vocal range with controlled transitions between drivers. FAQ — Acoustic Energy AE320² Floorstanding Speakers Are the Acoustic Energy AE320² speakers sold as a pair? Yes. This listing includes one matched pair of Acoustic Energy AE320² Floorstanding Speakers, consisting of one left-channel speaker and one right-channel speaker. What size room is best for the AE320²? The AE320² is designed primarily for medium-to-large listening rooms. Its twin bass drivers, high sensitivity and substantial cabinet volume allow it to produce greater scale and low-frequency authority than the smaller models in the 300 Series. What amplifier power is appropriate for the AE320²? The speaker has a 6-ohm nominal impedance, 92dB sensitivity and a rated power-handling capacity of 200 watts. A high-quality amplifier that is comfortable driving 6-ohm loudspeakers and provides appropriate clean power for the intended listening level is recommended. How far should the AE320² be placed from the rear wall? Because the AE320² uses rear-facing ports, it should be given reasonable clearance from the wall behind it. Final placement will depend on room size and bass balance, so experimenting with distance, toe-in and listening position is recommended. Why Buy From Us Authorized Acoustic Energy Dealer 5% Reward Points on Every Purchase Price Match Guarantee Expert Amplifier Matching, Speaker Placement and System Setup Support Related Acoustic Energy Products Acoustic Energy AE300² Bookshelf Speakers Acoustic Energy AE309² Floorstanding Speakers Acoustic Energy AE307² LCR Speaker Acoustic Energy AE Sub Powered Subwoofer Acoustic Energy AE320² Specifications Product Type Passive three-way floorstanding loudspeaker Series 300 Series System Configuration Three-way Enclosure Type Rear-ported bass-reflex cabinet with dedicated midrange loading Tweeter 1 × 29mm soft fabric-dome tweeter Tweeter Technology Corinium-derived design with Wide Dispersion Technology waveguide Midrange Driver 1 × 120mm paper and coconut-fibre cone Bass Drivers 2 × 140mm paper and coconut-fibre cones Frequency Range 30Hz–29kHz Sensitivity 92dB Nominal Impedance 6 ohms Power Handling 200 watts Crossover Frequencies 240Hz and 2.8kHz Cabinet Construction 18mm constrained-layer RSC MDF and bitumen Bass Port Rear-facing slot-shaped duct Midrange Loading Dedicated internally separated and tuned chamber Speaker Terminals Single pair of binding posts Bi-Wiring Support No Grilles Color-coordinated removable fabric grilles Feet Solid aluminum outrigger feet Floor Coupling Adjustable spikes with protective spike covers Dimensions per Speaker 41.34 × 7.87 × 13.78 in. 1050 × 200 × 350 mm H × W × D Weight per Speaker 57.3 lbs. / 26 kg Recommended Room Size Medium to large rooms Available Finishes Walnut, Silk-Touch Matte Black or Silk-Touch Matte White Quantity Pair Brand Acoustic Energy What's in the Box 2 × Acoustic Energy AE320² Floorstanding Speakers 2 × Color-Coordinated Removable Fabric Grilles 2 × Sets of Aluminum Outrigger Feet 2 × Sets of Adjustable Floor Spikes 2 × Sets of Protective Spike Covers 1 × Owner’s Documentation Amplifier, source components, speaker cables, subwoofer and professional installation services are sold separately.