Sherpa 4x4 On-board Air Compressor Kits (51 L/min)
These are a well built, industrial grade, air compressor, available with a 12V & 24V motor. The heavy-duty design, high discharge pressure and 100% duty cycle makes them perfect for a range of high demand applications. These compressors are exceptional quality and are perfect for permanent mounting in tight spaces on vehicles, 4wd's and trucks. On-board Air Compressor Kits (51 L/min) These compressors are extremely well built and capable of running at pressures up to 200 PSI. Whilst the average person doesn't need to run at such high pressures, it's nice to know the compressor you have is built with enough quality it can achieve it. At 100 PSI discharge pressure, these units have a 100% duty cycle meaning you can run them continuously without fear of overheating and damage. The over-sized quality motor delivers impressive performance with low amperage draw meaning your battery won't go flat. These are an oil-free compressor so can be mounted and run in any orientation. This compressor is perfect for 4wding enthusiasts who need to air up and down their tyres for different terrains. When driving on the beach tyre pressures should be reduced to around 18 PSI however at this pressure it is not safe or recommended to drive on a sealed road. Having a low voltage DC air compressor as part of your recovery equipment allows for fast and efficient tyre inflation when you need it. These compressors can also be used to inflate air mattresses and other pool toys or inflatable boats. Having the ability to achieve pressures of 200 PSI also makes them perfect for air suspension and air horn systems. These units can be mounted in any orientation which makes them perfect for automotive applications where space and mounting options can be a challenge. Onboard air systems are where users permanently mount the air compressor to their truck or 4x4 either under the bonnet or often inside the vehicle behind a wing or quarter panel. The air compressor is wired to the battery via an easily accessible switch. The air side of the compressor is often plumbed to an air receiver tank before piping to easy to access air connection locations. The air tank provides storage for the compressed air which makes inflating items such as your tyres faster. Having an air tank full of compressed air also means some air tools such as impact guns can be operated for roadside emergency repairs. A great feature of these compressors is that you can remote mount the air inlet and filter via the included accessories. This is great for under bonnet installations and ensuring you're not going to draw water into your compressor when you perform deep river crossings. These are a great compressor for people running air lockers in their 4wds and are looking for a reliable air supply. Air Compressor Specifications: Specifications Voltage 12V & 24V Max. Operating Pressure 200 PSI Air Flow 1.8 CFM / 51 LPM Max. Power Draw 23 amps (12v) 12 amps (24v) Duty Cycle 100% @ 100 PSI 50% @ 200 PSI Option to remote mount air inlet and filter Yes High-temperature steel braided hose tail Included Weight 5kg Dimensions 280 x 101 x 166mm Warranty 12 months 4WD Air Compression Kit A tank and compressor combo supplied with a range of fittings to help get your air compressor up and running faster. Adding an air tank is perfect for fast inflation of tyres of all sizes. The kit provides a 9.5 L tank with a massive 200 PSI pressure rating. The high-performance air compressor capable of reaching 200 PSI, fittings, pressure switch, some wiring plus more. Note: this is not a complete all-encompassing kit for every installation and users may still need additional components to completely install to their requirements. Kit Includes 200 PSI air compressor with high-temperature steel braided air hose outlet One way check valve 9.5L air tank rated for 200 PSI pressure Remote filter mount airline and fittings Electric Pressure Switch (150 PSI on, 200 PSI off) 1/4" Drain Cock 1/4" 250 PSI Safety Valve 1/4" Quick Connect Stud (F) 1/4" Quick Connect Coupler (M) 2.4m Low-Temperature, High-Pressure Air Hose 6m of 12 Gauge Wire with Inline Fuse Holder Mounting bolts and clips Air Tank Specifications Tanks 9.5L Max Operating Pressure 200 PSI Design Pressure 250 PSI Material Steel Ports 4 x 1/4" BSP & 1 x 3/8" BSP Mounting Bolts 4 Temp Rating -40° C to 80° C Colour Black Dimensions 546mm(L) x 165mm(W) x 216mm(H) Warranty 12 months Electrical Installation: Each compressor is supplied with a short wiring tail to connect to at the compressors motor. Connect the red wire to the positive terminal on your battery and the black wire to the negative and the compressor will operate. Add a switch on the positive wire to turn your compressor on and off as you wish. You can also wire via a relay and pressure switch on your air tank if you want the compressor to automatically cycle on and off maintaining tank pressure. Air Compressor Performance: Pressure(PSI) Current (A) CFM (LPM) 20 11 1.8 (51) 40 17 1.34 (38) 90 21 1.05 (30) 150 22 0.74 (21) 200 19 0.56 (16)