True 801849 Genuine OEM Drain Tube Heater 115V 10W

True 801849 Genuine OEM Drain Tube Heater The True 801849 Genuine OEM Drain Tube Heater is designed to help prevent condensate drain tubes from freezing in select True commercial refrigeration equipment. During normal refrigeration operation, moisture created by the evaporator must flow freely through the drain system. This heater helps keep the drain tube above freezing so condensate can drain properly instead of forming ice blockages. This Genuine OEM heater is rated at 115 volts and 10 watts with an approximately 32-inch heater length, 50-inch leads, and a 1/2-inch stripped wire end. Using the correct OEM drain heater helps maintain reliable condensate drainage and supports normal refrigeration performance. How the True 801849 Drain Tube Heater Works During refrigeration and defrost cycles, condensate water must travel through the evaporator drain system. Low temperatures can cause moisture inside the drain tube to freeze, restricting water flow and creating ice blockages. The True 801849 heater provides low-wattage heat directly to the drain tube, helping prevent ice formation while allowing condensate to flow normally. When operating correctly, this heater helps: Prevent frozen drain tubes Support proper condensate drainage Reduce standing water inside the cabinet Help prevent evaporator drain ice buildup Support reliable refrigeration performance Reduce unnecessary service calls caused by frozen drains Common Symptoms of a Failed Drain Tube Heater Frozen evaporator drain tube Water overflowing inside the cabinet Ice buildup around the drain opening Water leaking onto the floor Drain pan overflowing Repeated drain freeze-ups after defrost cycles Excess moisture inside the refrigerated cabinet These symptoms may also be caused by clogged drain tubing, damaged drain pans, improper equipment leveling, or restricted condensate flow. Inspect the complete drain system before replacing electrical components. Why Replacing a Failed Drain Heater Matters A frozen drain tube can prevent condensate from draining properly. When water cannot leave the evaporator compartment, it may freeze, overflow, or leak into other areas of the cabinet, increasing maintenance requirements and reducing equipment reliability. Replacing a failed drain heater helps restore proper condensate drainage while reducing unnecessary ice accumulation and water-related service issues. Commercial Refrigeration Applications The True 801849 drain tube heater is used on select True commercial refrigeration equipment, including certain: Reach-In Refrigerators Reach-In Freezers Glass Door Merchandisers Display Refrigerators Commercial Freezer Cabinets Foodservice Refrigeration Equipment Always verify the complete equipment model number, serial number, and OEM part number before ordering. Production changes may affect compatibility. Verified Specifications Manufacturer: True Manufacturing OEM Part Number: 801849 Voltage: 115V Power: 10 Watts Heater Length: Approximately 32 Inches Lead Length: Approximately 50 Inches Lead End: 1/2 Inch Stripped Application: Commercial Refrigeration Drain Tube Heater Professional Inspection Tips Disconnect power before servicing the equipment. Inspect the complete drain tube for ice blockage. Check drain tubing for restrictions or debris. Verify heater continuity before replacement. Inspect wiring for heat damage or loose connections. Confirm proper heater routing during installation. Verify normal condensate flow after service. Before You Order Verify Manufacturer: True. Confirm OEM Part Number: 801849. Confirm equipment model number. Confirm equipment serial number. Verify voltage requirements. Compare heater length and lead length with the original component. Frequently Asked Questions What does the True 801849 drain tube heater do? It helps prevent condensate drain tubes from freezing so water can drain properly during refrigeration and defrost operation. What are the electrical specifications? The heater is rated at 115 volts and 10 watts with an approximately 32-inch heater and 50-inch leads. Can a failed drain heater cause water leaks? Yes. A frozen drain tube can prevent condensate from draining normally, allowing water or ice to accumulate inside the cabinet. Should I inspect the drain tube before replacing the heater? Yes. Drain restrictions, debris, and ice blockages can produce symptoms similar to a failed drain heater. How do I verify this is the correct replacement? Confirm the complete equipment model number, serial number, and OEM part number before ordering. Why Buy From Parts Direct Online? Parts Direct Online specializes in Genuine OEM and commercial replacement parts for refrigeration and foodservice equipment. Our technical product pages help service technicians, restaurants, grocery stores, convenience stores, schools, healthcare facilities, and maintenance professionals identify the correct replacement parts with confidence through accurate OEM information and practical service guidance.