Eversolo T10

Network streaming transport The Eversolo T10 is a pure streaming transport: no DAC, no preamp, just the digital source. It sits ahead of the converter you already own and feeds it the cleanest, most stable signal possible, focusing on the three things that actually matter at this level: clocking, power supply and output isolation. A direct successor to the T8, it steps up on each of these fronts and becomes the brand's reference digital source. Clocking and power supply The T10 carries a temperature-compensated OCXO oscillator paired with a PLL circuit, a combination aimed at cutting jitter down to the bare minimum. For systems already running a reference clock, two BNC inputs (50 and 75 ohms) accept an external 10 MHz master clock — a feature usually reserved for considerably more expensive electronics. On the power side, a low-radiation linear toroidal transformer feeds the whole unit, with physical separation between the digital, power and output sections to contain crosstalk and internal interference. Connectivity and networking Every digital output is isolated: dedicated USB-A, HDMI I2S (with eight pinout modes to cover virtually every DAC on the market), AES/EBU on 110-ohm XLR, coaxial SPDIF and Toslink optical. On the network side there's a 2.5 Gb RJ45 Ethernet port, an SFP fiber port that removes any parasitic copper link, and dual-band Wi-Fi 6. Two USB-A 3.0 ports take an external drive or a CD drive for ripping, and a 12 V trigger in/out lets you sequence power-up across a full system. Library, DSP and calibration An eight-core ARM processor, 8GB of DDR5 RAM and 64GB of internal storage keep navigation through very large libraries latency-free, while two internal SSD slots (up to 8TB each, not included) push local storage to 16TB. The EOS audio engine bypasses the system's SRC processing to preserve each file's native resolution. The built-in DSP offers EQ across up to 40 bands, FIR filter import, loudness compensation and dynamic compression; the T10 is also compatible with the Evotune acoustic calibration system, usable with a USB measurement microphone. Services and compatibility The T10 natively integrates TIDAL, Qobuz, Amazon Music, Deezer, HIGHRESAUDIO, IDAGIO, Presto Music, Radio Paradise and TuneIn, and supports Spotify Connect (lossless), TIDAL Connect, Qobuz Connect, Roon, HQPlayer, JPLAY, NAA and DLNA. Remote libraries are read over SMB, NFS or WebDAV. Control happens through the 8.6-inch touchscreen, the Eversolo Control app (iOS and Android), or the supplied remote, which works over both Bluetooth and infrared. Technical specifications Type: network streaming transport, no built-in DAC Clock: temperature-compensated OCXO + PLL — 2 external 10 MHz BNC clock inputs (50 and 75 Ω) Internal power supply: linear toroidal transformer Processor / memory: 8-core ARM, 8GB DDR5, 64GB eMMC Storage: 2 SSD slots up to 8TB each (16TB total) — SSDs not included Resolutions: PCM 32-bit / 768kHz and DSD512 (USB and I2S); 24-bit / 192kHz and DoP64 (optical, coaxial, AES/EBU) — software upsampling up to 16x Inputs: 2.5 Gb RJ45, SFP fiber (module not included), 2x USB-A 3.0 OTG, 2x BNC clock, dual-band Wi-Fi 6 Outputs: isolated USB-A, HDMI I2S (8 modes), AES/EBU, coaxial SPDIF, Toslink optical Other connections: 12 V trigger in and out DSP: EQ up to 40 bands, FIR filters, loudness, dynamic compression, Evotune calibration Display: 8.6-inch touchscreen Chassis: CNC-machined aluminium, black Dimensions: 365 x 310 x 88 mm — weight 6.3 kg Mains: AC 110-240 V, 50/60 Hz — 20 W consumption In the box: Bluetooth/infrared remote, mains cable