AC Infinity Ionbeam Supplemental LED

Four slim bars let the AC Infinity Ionbeam Supplemental LED reach the parts of a canopy that an overhead fixture can miss. Positioned beside, between or below foliage as plants fill out and overlap, they add useful light through shaded growth without forcing the main light closer to the entire crop. Two bar lengths are offered for different layouts; the choice is primarily physical reach, while the exact wattage, diode count and dimensions for each set remain in Technical Specifications.Each sealed unibody bar carries Samsung LM301H EVO diodes on an aluminium board, combining 3000K and 5000K white light. AC Infinity rate the housing IP65 against dust and water jets, and credit the aluminium construction with moving heat away from the diode row. The four bars connect in series from one power adapter, with locking collars at the cable joints. Magnetic ends can grip a steel tent frame directly or clamp through canvas to the supplied steel mounting bars, while the included screws provide another option where the mounting surface is not magnetic.The wired schedule controller provides ten intensity levels, clock-based operation and gradual sunrise or sunset transitions. In schedule mode, the ON level becomes the operating ceiling and the OFF level becomes the floor, so the OFF value must be set to zero when the bars need to go completely dark. The supplied UIS lead can connect the power adapter to a compatible UIS controller instead. AC Infinity publish close-range intensity guidance for supplemental use, but no PPF, PPFD map or coverage footprint for either model, so placement should be adjusted cautiously around the actual canopy rather than treated as a fixed coverage claim.NOTE: These full-spectrum S-series bars do not emit ultraviolet light. AC Infinity instruct that the LEDs must not be stared at directly and that timer programming must not be relied on as the only means of isolating power. Unplug the power cord before installing, moving or servicing the set.