Toyota HiLux Prado 1GD-FTV 2.8L Assembled Cylinder Head

1GD-FTV Assembled Cylinder Head — Ready to Install Brand-new assembled 1GD-FTV cylinder head for Toyota HiLux, HiAce, Prado, Fortuner and Granvia with 2.8L turbo diesel engine. Professionally assembled, valve-to-seat compression tested, and ready to bolt on — gasket set and head bolts sold separately. Camshafts, rocker arms and lifters transfer from your original head. Fits: Toyota HiLux (2015–2025), HiAce (2017–2025), Prado (2015–2025), Fortuner (2015–2025), Granvia (2019–2025) — Engine code 1GD-FTV, 2.8L turbo diesel. Important: Camshafts, rocker arms and lifters are not included — transfer your original components from the old head to the new one during installation. Gasket set and head bolts are also not included — see our 1GD-FTV Parts range or the complete Cylinder Head Kit if you need everything in one order. What's Included: Brand new assembled cylinder head casting Valves, springs, retainers & valve stem seals fitted ✓ Free Delivery: Available to most Australian addresses — Perth pickup also available Not Included — Source Separately: Multi-layer steel (MLS) head gasket VRS gasket set Torque-to-yield (TTY) head bolts Camshafts (inlet and exhaust) Rocker arm assembly Lifters / tappets Key Specifications: Engine Code: 1GD-FTV — 2.8L turbo diesel Valve configuration: 16-valve DOHC Camshafts/rockers/lifters: Not included — reuse originals from old head Quality: 100% quality inspected, valve-to-seat compression tested, head face checked and refaced if necessary ✓ Warranty: 12 months Compatibility Guide Guide only — please contact us if you are unsure. 2015–2025: Toyota HiLux with 2.8L turbo diesel, engine code 1GD-FTV 2017–2025: Toyota HiAce with 2.8L turbo diesel, engine code 1GD-FTV 2015–2025: Toyota Prado with 2.8L turbo diesel, engine code 1GD-FTV 2015–2025: Toyota Fortuner with 2.8L turbo diesel, engine code 1GD-FTV 2019–2025: Toyota Granvia with 2.8L turbo diesel, engine code 1GD-FTV Order online or by phone. Pickup available in Perth (Midland) or fast dispatch from Melbourne. Frequently Asked Questions Do I need to swap my camshafts across? Yes — camshafts, rocker arms and lifters are not included. Transfer your original components from the old head to the new one as part of the installation process. Do I need a new gasket set and head bolts? Yes — the 1GD-FTV uses torque-to-yield (TTY) stretch bolts which are single-use only, and a new MLS head gasket is always recommended. These are not included with this product — see our complete Cylinder Head Kit if you'd prefer everything in one order. Not sure if your cylinder head has failed? Read our guide: 1GD-FTV Cylinder Head Failure — Symptoms, Causes & Replacement → Browse all Toyota 1GD-FTV Parts