Kingfisher Thermapaint Anti-Mould Paint - Anti-Condensation Paint with Built-In Mould Resistance
Thermal Anti-Condensation Paint with Built-In Mould Resistance Kingfisher Thermapaint Anti-Mould is a dual-purpose emulsion paint formulated to reduce condensation and prevent the growth of black spot mould on interior walls and ceilings. Using micro-bead vacuum technology, it raises surface temperature to help minimise moisture buildup while an integrated fungicidal film actively protects against mould regrowth. Ideal for areas prone to condensation such as bathrooms, kitchens, and bedrooms—especially in homes with poor insulation—this breathable matt paint improves air quality, enhances surface warmth, and offers a longer-lasting decorative finish. Key Features & Benefits Reduces Condensation: Micro-beads increase surface temperature to limit moisture buildup by up to 96% Stops Black Spot Mould: Integrated fungicide film prevents regrowth and protects respiratory health Improves Air Quality: Ideal for social housing, rented accommodation, and vulnerable environments Thermally Insulating: Reflects radiant heat back into the room, increasing surface warmth Decorative Matt Finish: Available in Brilliant White, Magnolia, and selected "Lakes & Fells" colours Low VOC & Water-Based: Safe for interior use with easy water clean-up Product Details & Coverage Finish: Matt emulsion Coverage: 4–6 m² per litre per coat (2 coats recommended) Drying Time: 1–2 hours touch dry; recoat after 2–4 hours Application Temperature: +10 °C to +25 °C (air and surface) Service Temperature: 4 °C to +50 °C VOC Content: Max 10 g/l (EU limit: 30 g/l) Sizes Available: 2.5L, 5L, 10L Application Instructions Clean & Treat: Remove existing mould with Kingfisher Mould Cure. Allow to dry completely. Surface Prep: Fill any cracks or defects. Seal powdery areas with Kingfisher Floor & Wall Seal. Prime (if needed): New or bare surfaces should be primed with a thinned coat of Classic Emulsion (5:1 paint to water). Apply Paint: Stir thoroughly. Apply two coats with a brush or roller, allowing 2–4 hours between coats. Limitations & Safety Internal use only—do not apply to heated surfaces like radiators Ensure adequate ventilation during application Store in a cool, dry place and protect from frost Do not apply in damp or humid conditions Thermapaint Anti-Mould is part of Kingfisher’s specialist damp-proofing range—engineered to deliver comfort, protection, and clean aesthetics in any home.