BOCHU MCD100 Recognition Window Protective Lens / Conductive Glass DP.P.Z0003AA

Protective Lens / Conductive Glass for the MCD100 recognition window. Identify the replacement by the exact part number DP.P.Z0003AA.What This Part IsThis conductive glass is installed at the MCD100 recognition window.When Replacement Is NeededReplace the conductive glass when contamination affects normal recognition or when the glass is damaged.Replacement PositionThe recognition-window assembly uses four M4 × 6 Phillips countersunk screws. Removing the screws exposes the conductive-glass pressure plate.Replacement Guidance Remove the four M4 × 6 Phillips countersunk screws and the pressure plate. Remove the contaminated or damaged conductive glass. Before installation, confirm that the new conductive glass has no obvious dust, foreign material or contamination. Confirm that the pressure plate is free of oil contamination and foreign material. Install the conductive glass with the triangular orientation mark facing upward. Reinstall the pressure plate. Pre-tighten the four screws, then perform final tightening to 1.2 N·m. How to Confirm the Correct PartConfirm the MCD100 device identity and exact part number DP.P.Z0003AA before ordering. Do not infer broader cutting-head compatibility.Browse the MCD100 Collection.