Ambrosia PLA - Dolos Color Shifting Filament - Refill Core

In stock, ready to ship. Please note: Dolos Filament is more hygroscopic than normal filament, we recommend drying/keeping it dry for best results. Refill core only. No spool included. Ambrosia refill cores use the same geometry as Bambu refills, so they load directly into a Bambu AMS or any reusable spool built for Bambu-style refills. You will need one of these to print with this product. Ambrosia Filament's line of PLA is part of the Low Calorie line of filament, no additives just butter smooth printing. Feed your Printer the Filament of the Gods. Dolos - the greek spirit of trickery and deception has implanted his work onto our next line of PLA filament. These filaments provide alternating color effects based on where you view the printed parts from. They are a unique filament that will take your flexi-dragon game up to a whole new level! Derived from 100% Virgin Grade-A Non-Toxic pellets. Manufactured to a tighter than standard tolerance (+/- 0.03mm) you'll experience consistent extrusion throughout the roll. PLA is most hobbyist makers material of choice for 3D printing. A bio-degradable plastic derived from renewable resources (such as corn... I know we say our filament is low calorie, but don't eat it - your printer is the only machine that should injest our filament!) it is one of the easiest materials to print with, with a relatively low melting point and is able to be printed without a heated bed. Printing with PLA is typically odorless, or when it smells gives of a 'sweet' aroma, and emits less harmful fumes than some other 3D printing materials, making it a safer option for enclosed spaces without proper ventilation. Arrives to you in a cardboard box, with filament wound on a cardboard refill core, vacuum sealed with a desiccant bag. Derived from 100% Virgin (Grade-A) non-toxic pellets Diameter: 1.75mm (+/-0.03mm) Filament Net Weight: 1KG Core geometry matches Bambu refills Ambrosia rates the glue in their cardboard packaging for environments up to 70C (158F). If you plan to run this in a filament dryer, check that your dryer stays under that limit, and check the temperature rating of whatever reusable spool you mount the core on. Ambrosia Filament's Recommended Print Settings for our PLA filament: Attribute Accepted Value(s) [Our Recommended Value] Extruder Temperature 190-220 Degrees Celsius [210] Heated Bed 0-65C Degrees Celsius [60] Build Surface PEI, Glass, Painters Tape, Buildtak, or similar surface [Smooth PEI] Cooling Fan 50-100% range varies by cooling capabilities Environmental Temperatures 15-40C [25C] Soluble Support Materials PVA, BVOH Technical Specifications for our PLA Filament: Physical Properties Test Methodology Values Density ISO1183 1.25-1.26 g/cm^3 Melt Flow Rate (250C/2.16KG) ISO 1133 4-8 g/10min Mechanical Properties Test Methodology Values Tensile Strength ISO 527 45-49 Mpa Elongation at break ISO 527 13-15.5% Flexural Modulus ISO 527 1000-1100 Mpa Flexural Strength ISO 178 69-75 Mpa Impact Strength ISO 180 4.5-5 KJ/m^2 Thermal Dynamic Properties Test Methodology Values HDT@ 0.455 MPa(66 psi) ISO 75 53C Continuous Use Temperature IEC 60216 50C Filament can absorb moisture easily. To prevent moisture absorption and contamination, the packing of filament should be kept sealed and in an airtight container with desiccant. Disclaimer: Filaments, including this product, may emit toxic fumes (Volatile Organic Compounds) into the air when heated. Please consider this and follow safety protocols when printing with Ambrosia Filament. Only use in a well ventilated area, with proper respiration equipment. Technical Data and Safety Data contained attempts to summarize to the best of our knowledge the properties, health and safety information of the specified product and how to handle it. However, it is your responsibility to determine the suitability for use. Ambrosia Filament provides no warranty and assumes no responsibility or liability for the information contained and expressly disclaims that the information is a representation or guarantee of the specifications, properties, or health and safety data.