Data Center Fiber Inspection Kit

Description Data Center Fiber Inspection Kit These purpose-built fiber inspection and cleaning kit for data center technicians responsible for maintaining and verifying fiber infrastructure in enterprise, colocation, and hyperscale environments. Connector contamination is the leading cause of fiber link failures, and this kit gives technicians everything needed to inspect, clean, and verify fiber connections before they become outages. End-face inspection via wireless microscope covers LC, SC, and MPO 12 and 16 core connectors in high-density patch panels, with a coming soon MPO adapter extending reach to the tightest AI backbone ports. Format-specific cleaning tools and consumables address every connector type in the kit, from 1.25 mm LC and MU ferrules to 2.50 mm SC and ST ferrules and high-density MPO end-faces, ensuring complete contamination removal before every connection. The kit also covers insertion loss measurement on single-mode fiber runs, live fiber identification without disrupting active traffic, and safe connector handling in crowded rack environments, giving technicians a complete inspection and verification workflow from a single organized backpack. Features Features The WFM-100 helps inspect LC, SC, MPO 12-core, and MPO 16-core fiber connector end-faces, catching contamination before it degrades link performance or causes outages. Clean fiber connectors using format-specific tools such as CLS-125/50 cleaning sticks for LC, CLS-250/50 cleaning sticks for SC or FCC-300 for LC/SC Single or Duplex, FCCS-120 for MPO 12-core, and FCCS-160 for MPO 16-core. Additional consumables such as CWP-125 swabs, DW-90 dry wipes, FCF-3 Precision Cleaning Fluid, and FW-50 wet wipes included providing a full solution to removing particulate contamination that raises insertion loss in ways the human eye cannot detect. Measure insertion loss FPM-50S and verify fiber link performance FLS-50S across single-mode installations, covering commissioning sign-off, ongoing maintenance verification, and fast first-pass fault checks without requiring full OTDR setup. Identify live fiber and confirm signal presence on active fiber runs without disrupting traffic, OFI-100 provides a safe, non-intrusive way to verify which fibers are in service before cleaning, patching, or rerouting connections in live data center environments. Reach into high-density fiber patch panels for controlled connector insertion and removal where finger access is limited with the FCT-100, without disturbing adjacent live connections during inspection and cleaning work, and use the JIC-842 long nose pliers for gripping, bending, and cutting in tight spaces where standard hand access won't reach. Keep all inspection, cleaning, and verification tools organized and field-ready in the BP-100 rugged technician backpack, built for technicians working across large hyperscale data halls, colocation facilities, and enterprise server rooms where fiber reliability directly impacts network uptime. Optional Add-Ons AST-210 - CableSaber+ Armored Cable Slitter FLC-3505 - Singlemode Fiber Optic Launch Box, 350 m, SC/UPC-SC/APC OTDR-1100 - Multi-Function Touchscreen OTDR, 1310/1550 nm, 28/26 dB OTDR-1500 - Professional Multi-Function OTDR, 1310/1550 nm OTDR-1650 - Professional Multi-Function OTDR, 1310/1550/1650 nm 36dB Specifications Spec Sheet TECHNICAL SPECIFICATIONS DATA CENTER TYPE TRADITIONAL (EDGE, ENTERPRISE, COLOCATION), HYPERSCALE (CLOUD, LARGE-SCALE), AI NETWORK (CAMPUS/GPU CLUSTERS) ENVIRONMENT TYPE INSIDE PLANT (ISP) & OUTSIDE PLANT TO INSIDE PLANT (OSP-TO-ISP) SOLUTIONS FOCUS CABLING INFRASTRUCTURE: FIBER LIFECYCLE PHASE ALL PHASES (PREP & INSTALL, CLEANING & INSPECTION, TESTING & COMMISSION, REPAIR & MAINTENANCE) CAPABILITIES BEND, CABLE TESTING, CLEAN, CUT, FIBER TESTING, INSPECTION, GRIP, PULL, STRIP, STORE & CARRY CABLE TESTING CAPABILITIES RJ45 CONTINUITY AND TRACKING CLEANING CAPABILITIES WET WIPING DRY WIPING CLICK CLEANING: FC, LC, SC, ST, MU, LC-DUPLEX, MU-DUPLEX, MPO/MTP 8, 12, 24 (12X2), 16, 32 (16X2) CONNECTORS & PORTS CLEANING STICKS: 1.25 MM LC & MC, 2.5 FC, SC, ST CONNECTORS CUTTING CAPABILITIES SIDE-CUT: HIGH STRENGTH WIRE, BOLTS, NAILS FIBER TESTING CAPABILITIES OPTICAL INSERTION LOSS: 1310/1550 NM OPTICAL POWER PERFORMANCE: 800-1650 NM, -50 TO +26DBM OPTICAL FIBER IDENTIFICATION: 270HZ, 1KHZ, 2KHZ VISUAL FAULT LOCATION: 2 MW RJ45 CONTINUITY AND TRACKING INSPECTION CAPABILITIES 1.25 MM LC (PC/UPC) & 2.5 MM FC/SC/ST (PC/UPC) MPO/MTP 8, 12, 24 (12X2), 16, 32 (16X2) CONNECTORS PULLING & GRIPPING CAPABILITIES LC, SC-SIMPLEX, SC-DUPLEX, MU, MT-RJ GENERAL MATERIALS REMOVAL METHOD STRIP: PVC, RUBBER, PE STRIPPING CAPABILITIES 18 AWG & 22 AWG DIMENSIONS 14.76 IN X 7.4 IN X 18.7 IN WEIGHT 11.212 LB UPC # 810215350605 What's in the Box What’s in the Box Qty 1 - Data Center Fiber Inspection Kit KIT INCLUDES BP-100 TECHNICIAN’S TOOL BAG BACKPACK CLS-125/50 CLEANING STICKS FOR FIBER OPTIC CONNECTORS, 1.25 MM, BOX OF 50 CLS-250/50 CLEANING STICKS FOR FIBER OPTIC CONNECTORS, 2.50 MM, BOX OF 50 CWP-125 POINTED COTTON SWABS, PACK OF 125 DW-90 DRY WIPES FOR CLEANING FIBER FCC-300 UNIVERSAL FIBER CONNECTOR CLEANER FCCS-120 SLIM FIBER CONNECTOR CLEANER, MPO 12 CORE FCCS-160 SLIM FIBER CONNECTOR CLEANER, MPO 16 CORE FCF-4 ALL IN ONE FIBER OPTIC CLEANING FLUID FCT-100 FIBER CONNECTOR TOOL FOR LC, SC CONNECTORS FPL-5050S MINI LIGHT SOURCE & POWER METER KIT FW-50 FIBER WIPES, WET (PACK OF 50) JIC-842 LONG NOSE AND SIDE CUTTING PLIERS OFI-100 ADVANCED OPTICAL FIBER IDENTIFIER W/ POWER METER & VFL WFM-100 WIRELESS FIBER INSPECTION MICROSCOPE W/ UPC ADAPTERS WFM-MPOU WIRELESS FIBER MICROSCOPE W/ MPO/UPC ADAPTER