Victron Energy Cerbo GX MK2 Communication Centre BPP90045110
The Cerbo GX MK2 is a complete communications centre that can be accessed via Bluetooth using the VictronConnect app, directly using the GX Touch 50/70 or Touch 50/70 Flush Mount colour touchscreens, via LAN, Wi-Fi access point or over the web using the Victron Remote Management (VRM) portal. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way. What are the updates in the MK2 version? There are now two fully functional CAN bus ports (VE.Can 1 and VE.Can 2), instead of one VE.Can and one BMS-Can port. VE.Can 1 is isolated, whereas on the previous model there was no isolated CAN bus port. The RJ-45 sockets have been rotated 180 degrees, so it’s easier to remove the cables. All three USB ports are now fully functional, instead of two functional and one only for power to a GX Touch screen. The digital inputs can now do pulse counting. You can instantly monitor your battery’s state of charge, power consumption, power harvest from solar panels, generator, and mains, or check tank levels and temperature measurements. Easily control the shore power input current limit, (auto)start/stop generator(s) or change any setting to optimise the system. Follow up on alerts, perform diagnostic checks and resolve system issues remotely. The Cerbo GX MK2 turns any power challenge into an effortless experience. Optional GX Touch 50/70 Displays The Victron GX touch range of control panels connect to the Cerbo GX MK2 and gives you an instant overview of your system and the ability to adjust settings. The Cerbo GX MK2 serves endless purposes, extending perfect control to the most diverse applications. For solutions including generators, such as marine or backup & off-grid, it will auto-start/stop your generator, or delays ignition until the end of ‘quiet’ periods. For energy storage systems it keeps backup batteries at 100%, kicks-in during power-cuts and diverts excess solar power to self-consumption, saving you money. For RV and Emergency vehicles it keeps vital systems function flawlessly. Features Dual Core Processor Ethernet port Wi-Fi Access Point Bluetooth connectivity 3 x VE.Direct ports 3 x fully functional USB ports & 1 x HDMI port and 1 x Micro SD slot 2 x VE.Bus, 2 x fully functional VE.Can and 2 x BMS-Can ports 4 x resistive tank level inputs 4 x temperature inputs 4 x digital inputs (with pulse counting) 2 x programmable relays Accessories included with the Cerbo GX MK2 Power cable with in-line fuse and M8 rings to connect to a battery 3 x terminal blocks for tank, temp and digital inputs 2 x terminal blocks for relays Terminal block for Power In 2 x VE.Can terminators Technical: Supply voltage: 8-70V DC Mounting: Surface or DIN rail (requires DIN35 adaptor) VE.Direct ports (always isolated): 3 VE.Bus (always isolated): 2 paralleled RJ45 sockets VE.Can: Yes, 2 fully functioning with one isolated Overall dims: 78 (W) x 154 (L) x 48 (H) mm Operating temperature range: -20°C to +50°C Part Number : BPP900451100