EasyStand StrapStand Strap-Style Standing Frame – 350 lb Capacity

The StrapStand removes the transfer entirely — it lifts the user into standing directly from their wheelchair, bed or other seated surface. Send the therapist's recommendation to (866) 338-2838 or info@morellimedical.com and we will build the quote around it — no cost, no obligation. EasyStand StrapStand · P2100-1 Standing without the transfer The StrapStand is EasyStand's strap-style stander for users roughly 5′0″ to 6′5″ and up to 350 lb. A lifting strap goes behind the user where they sit, and the frame raises them to a full upright stand — no transfer, operated like the patient lifts care staff already know. The arms lift vertically first, then pull over center, sparing the knees and finishing in a full over-center stretch. Who it fits Adults 60″ to 77″, up to 350 lb — especially users who cannot transfer independently. Standard inside access 22.75″; swing-out legs take 38″-wide wheelchairs. Built for care settings One 125 lb unit on a 28″ × 34″ footprint serves a whole floor: roll, lift, stand, lower, move on. Straps Small to X-Large, fixed or adjustable. Funding Coded HCPCS E0637. EasyStand publishes a StrapStand-specific letter of medical necessity and funding guide — ask us for both. The sibling question StrapStand or a seated sit-to-stand The transfer decides. If the user can transfer, the Evolv offers the far wider positioning catalogue. If the transfer is the barrier, the StrapStand removes it — support from strap, front pad and knee pads instead. The therapist's transfer assessment decides it. Two ways to buy Itemised build or support package An itemised build lets the therapist specify every component; a support package bundles a tested combination at one price, no substitutions. If the assessment needs anything outside the bundle, itemise. We can quote both. Features 01 · No-Transfer Lift From seated to standing, with no transfer Roll the frame to the user, place the strap where they sit, and the arms raise them to standing. The transfer — the hardest step of every other standing frame — simply isn't there. It works like the patient lifts staff already use. Lifts from wheelchair or bed Patient-lift familiarity Higher compliance 02 · Lifting Design Up first, then over — kind to the knees Most strap standers drag the knees into the pad. The StrapStand lifts vertically first, then pulls over center — gentle on the knees, ending in a full over-center stretch. Support comes from the strap, adjustable front pad and knee pads, with Roho options, an upper body strap and multi-adjustable footplates. Vertical-first lift Reduced knee pressure Over-center stretch 03 · Access & Capacity Room for real wheelchairs Standard inside width takes a 22.75″ chair; swing-out legs open the base to 38″-wide chairs — power, tilt-in-space, bariatric — on a footprint of just 30″ × 38.5″. Capacity 350 lb across 5′0″–6′5″, from a 125 lb unit on locking casters. 5′0″–6′5″ · 350 lb Swing-out legs to 38″ chairs 125 lb unit 04 · Before You Order Fit, configuration and safe use Strap sizing is a required selection. Small, Large and X-Large, fixed or adjustable — the therapist's measurement decides. No supine, and support is strap-based rather than a full seating system. For extensive postural support, see the Evolv range. Configuration comes from the treating therapist. Send us the recommendation and we will build to it. Limits: 350 lb, about 5′0″–6′5″. Wide or powered wheelchairs need the swing-out legs frame — standard inside access is 22.75″. Read the owner's manual in full before first use and follow the lifting method it describes. Standing programmes should be prescribed and supervised by the user's physician, physical therapist or occupational therapist. Morelli Medical supplies equipment and does not provide clinical assessment, prescribe therapy, or advise on standing protocols. Specifications EasyStand StrapStand — Base Unit Model / SKU P2100-1 Manufacturer Altimate Medical, Inc. — Morton, Minnesota HCPCS Code E0637 — combination sit-to-stand frame system, any size including paediatric, with seat lift feature, with or without wheels Frame Type Strap-style, no-transfer standing frame — lifts directly from the user's seated surface; supine not available Approximate Height Range 5′0″–6′5″ (152–195 cm) Weight Limit 350 lb (159 kg) Wheelchair Access 22.75″ inside width standard · swing-out legs option accepts front widths up to 38″ Lifting Straps Small 9″×25″ · Large 12″×28″ · X-Large 14″×32″ · adjustable versions with 0″–8″ range Knee Pad Height 18″–21″ from footplate · 9″ width centre to centre · depth 6″–9.5″ from back of heel · independent and Roho options Front Pad Depth 2″–12.5″ from back of heel · height 40″–56″ from footplate Footplates Multi-adjustable option: height 1″–5″ from floor · toe-out neutral to +15° · plantar/dorsiflexion ±20° · XL footplate 7″×14″ per foot Tray 21″×24″ molded or acrylic · height 42″–58″ from footplate · angle-adjustable version 0–35° Footprint / Unit Weight 28″W × 34″L standard · 30″W × 38.5″L with swing-out legs · 125 lb basic unit · 3″ locking casters Frame & Upholstery Oxford Gray frame · black upholstery Supply Status Rx only — prescription or professional licence required before shipment Quality Certification Manufactured under ISO 13485:2016 certified quality management EasyStand Limited Warranty Steel Frame 5 years Hydraulic Actuator 2 years Electric Actuator & Hand Control 2 years, where fitted Control Box, Battery & Charger 90 days Pads, Upholstery, Rubber, Paint, Bearings 90 days Strap-based support, prescribed fit. The StrapStand's support comes from the lifting strap, front pad and knee pads — the treating therapist should confirm that level of support suits the user, and specify the strap size and frame style. Where a full seating system in standing is needed, the Evolv range covers it. Prescription required: this product is supplied Rx only. We verify a valid prescription or professional licence before shipment. If you do not have one, provide your prescriber's details and we will request it on your behalf. Configuration: each StrapStand is built to the individual user — frame style, lifting strap, knee pads, foot plates and positioning options should be specified by the treating physical or occupational therapist. Send us the recommendation and we will quote the build against it. Manufacturing quality: Altimate Medical, Inc. holds ISO 13485:2016 certification for medical device quality management systems, and manufactures in Morton and Redwood Falls, Minnesota. The company has been building standing frames since 1987. What's Included StrapStand base frame with lifting arms Manual hydraulic actuator with handle Lifting strap — your selected size and style Knee pad Foot plates Black upholstery on an Oxford Gray frame Commonly added: swing-out legs frame, adjustable lifting straps, molded or acrylic tray, angle-adjustable tray, upper body support strap, independent or Roho knee pads, multi-adjustable footplates, XL footplates, secure foot straps, and actuator handle accessories. The full option set is on EasyStand's StrapStand order form — send us the therapist's selections and we will quote them. Documents & Resources Instructions for use ↗ EasyStand order forms — current StrapStand itemised and package pricing ↗ Funding guide for standing devices ↗ Standing log ↗ Range of motion chart ↗ How to order: call us on (866) 338-2838 or email info@morellimedical.com with the therapist's recommendation, the user's height and weight, and the wheelchair's front width if wide or powered chairs are in use. We will confirm the fit, build the configuration and quote it — itemised or as a support package, whichever suits. The StrapStand comes in one size covering 5′0″–6′5″ and up to 350 lb. Replacement straps, pads and upholstery are available separately.