Bambu PETG Basic

Bambu PETG Basic Stronger Than Ever, Yet Still Tough Thanks to its upgraded formula, Bambu Lab PETG Basic now matches the strength of PLA Basic while retaining the toughness needed to absorb impacts. It can handle greater loads and stress than before, making it well suited for structural household parts and practical tools such as holders, wall hooks, brackets, and clips. Mechanical Properties Comparison PETG Basic PETG HF PLA Basic Strength (Bending Strength - XY) 75 MPa MPa 64 MPa 76 MPa Layer Strength (Bending Strength - Z) 56 MPa 48 MPa 59 MPa Toughness (Impact Strength - XY) 34.2 kJ/m² MPa 31.5 kJ/m² 20.6 kJ/m² A Cost-Effective Choice for Outdoor Prints Engineered for long-lasting performance in outdoor environments, Bambu Lab PETG Basic combines durability with affordability. Its strong resistance to water, UV, and temperature makes it a highly cost-effective option for outdoor applications. From garden labels to bathroom accessories, it’s a practical, budget-friendly choice for prints that need to withstand everyday conditions. Multi-Color, Stunning Results Bambu PETG Basic selects 13 colors, offering a rich range of printing color schemes. It is sturdy and durable, yet can also be vibrant and stunning. The abundant color matrix opens up endless possibilities for you, from home decor to outdoor gear. Less Stringing, Superior Surface The all-new Bambu Lab PETG Basic shows reduced stringing thanks to its lower sensitivity to moisture compared to typical PETG filaments, resulting in smoother surfaces and crisper details. *Drying is still recommended to optimize printing results. For more details, please refer to the Printing Tips. RFID for Intelligent Printing All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). UL GREENGUARD certified. Cleaner air for indoor printing. PETG Basic is certified to UL GREENGUARD (UL 2904), the recognized standard for 3D printer emissions. The particles and VOCs released measure below the levels of an average kitchen, living room, or office—cleaner than the air you're already breathing. Download Filament TDS Filament MSDS Filament RoHS Hex Code Filament POPs Filament CP65 Filament TSCA Filament SVHC Filament PAHs EN71-3 Printing Tips 1.Accessory Compatibility Compatible with all printers, AMS, build plate, and nozzles. 2.Drying Recommendations Dry out before use for higher printing quality. If PETG Basic has been exposed to air with relative humidity above 50% for more than 72 hours, please dry it thoroughly according to the instructions before printing to ensure optimal print quality. For more details, please refer to: Filament drying instructions on WIKI. 3.Refill Guidelines The refill filament needs to be used with a spool. For detailed instructions on how to swap in the new filament using the Bambu Reusable Spool, please refer to the guide on WIKI. 4.Post-processing Tips PETG Basic adheres strongly to the PEI plate. After printing, please wait for the plate to cool down before removing the model to avoid damaging the bottom surface.