White CAD-CUT® UltraWeed™ Heat Transfer Vinyl

**Will Call/ Pick up customers. This item is stocked in Lake Elsinore. If picking up in Corona please allow for next day delivery to our Corona Office. UltraWeed™ is the go-to material you need for everyday heat printing projects. With smooth cutting on any vinyl cutter, effortless weeding, and low temp application, it’s guaranteed to give you the ultimate, worry-free application from start to finish. Clear carrier for accurate placement Scorch-free application Matte-finish & soft feel Available in 12", 15" and 20" wide rolls ( Ask Us for details) Compatible with our Stahls' Rip-Away Appliqué™ Process Material Specifications Composition: Polyurethane (PU) Carrier: High-Tack, Clear Thickness: 90-100 microns (.09-.1mm) Washability: 50 Safety: CPSIA Certified Laser cutter compatible 1-Color Application Instructions Time:12 seconds Temperature:260-300°F Pressure: Medium Peel: Hot 2-Color Application Instructions Time: Press background layer for 2-3 seconds, place foreground layer for full application of 12 seconds Temperature:260-300°F Pressure: Medium Peel: Hot Hotronix® 360 IQ™ Hat Press Time:45 seconds Upper:280°F Lower:320°F Pressure:Medium Peel:Warm/Cold Cover Sheet:1/8" Foam Pad Special Notes If the garment is 50% or more cotton it will require 280°F + degrees. Care Instructions Machine wash inside-out using mild detergent. Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean. Storage Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year. Material/Fabric Compatibility 100% Cotton 100% Polyester Cotton/Poly Blends Lycra®/Spandex Blends Find useful comparisons and cutting information in the following documents: HTV Placement Chart Application Instructions Stahls HTV Compatibility by Fabric Type Chart Craft Cutter Setting Recommendations Cutter Instructions, Roland, Graphtec, etc In some cases this item may ship direct from manufacturer. Please allow for +/- .50 in length or width to allow for manufacturing anomalies.