ALINX HEA13: Xilinx Virtex UltraScale+ XCVU13P FPGA Heterogeneous Computing Development Board

Features What's Included Resources & Downloads Description HEA13 is a flagship Heterogeneous Computing offering with XCVU13P FPGA, 4x 100G QSFP28, 2x FMC+, NVIDIA Jetson AGX Orin / Thor T5000 module enabling high signal processing bandwidth, rich expandability. Ideal for LLM, Physical AI, Edge AI, Robotics, high-end ASIC/SoC prototyping and verification, radar/communication real-time signal processing. The SOM model is ACVU13. For a High Performance XCVU13P FPGA Development Board also using this SOM, check our AXVU13G. FPGA Specification SOM ACVU13 FPGA XCVU13P-2FHGB2104I Speed Grade -2 Chip Level Industrial Grade Working Temperature -40℃~85℃ System Logic Cells (K) 3,780 CLB Flip-Flops (K) 3,456 CLB LUTs (K) 1,728 Max. Distributed RAM (Mb) 48.3 Total Block RAM (Mb) 94.5 UltraRAM (Mb) 360.0 DSP Slices 12,288 Peak INT8 DSP (TOP/s) 38.3 PCIe® Gen3 x16 4 150G Interlaken 8 100G Ethernet w/ KR4 RS-FEC 12 GTY 28.21 Gb/s Transceivers 76 Max. Single-Ended HP I/Os 702 Board Features DDR4 2 Groups of 5x 2GB, total 20GB, 80bit Bus, Data Rate 2666Mbps QSPI Flash 2x 128MB, for FPGA bin file and user data storage Crystal Oscillator 2x 200MHz Differential Crystal, Reference Clock for the FPGA and DDR4 1x high-precision, low-jitter programmable multi-channel clock source with 14 clock channels, reference for GTY. FMC+ 2x FMC+, compatible with FMC+ and FMC Gigabit Ethernet 1x 10/100/1000M Ethernet with RJ45 for data exchange, RGMII to FPGA QSFP28 4x QSFP28 100G, each to 4x GTY with channel speed up to 25Gbps SD Card Slot 1x micro SD Card Slot, support SD Mode and SPI Mode SMA 2x SMA, for Ext Clock or I/O IN. USB UART Type-C, for Serial Communication with PC/Devices JTAG 10-pin 2.54mm Standard JTAG port for Program Debug and Download LED SOM: 1 DONE, 1 Power; Carrier: 1 VU13_STATE, 2 User Push-Buttons 1 Power On/Off, 1 Reset, 2 User Nvidia Jetson Module Options Jetson AGX Orin 32GB Module 200 TOPS (INT8), 32GB LPDDR5 (Purchase separately) Jetson AGX Orin 64GB Module 275 TOPS (INT8), 64GB LPDDR5 (Purchase separately) Jetson Thor 128GB Module 2070 TOPS (FP4), 128GB LPDDR5x (Included with HEA13) Nvidia Jetson AGX Orin / THOR Features USB 3.2 2x, Type-C, supports HOST, SLAVE, OTG modes Gigabit Ethernet 1x 10G, RJ45, only for AGX module 1x 5G, RJ45, only for THOR module DP 1x DisplayPort Output, up to 4K@30Hz or 1080P@60Hz SD Card Slot 1x micro SD Card Slot, for AGX Orin / Thor OS Image and file system M.2 SSD 1x M.2 KEY-M, for NVME SSD, up to 5Gbps per channel M.2 Wifi/BT 1x M.2 KEY-E, for WiFi/BT module, up to 5Gbps per channel 40-pin Expansion Port for AGX Orin / Thor GPIO or Expansion modules PCIE3.0 1x PCIE3.0 x8, for AGX Orin / Thor communication with FPGA, via 699-pin board-to-board connector UART 1x Uart 3-pin 2.54mm, for AGX Orin / Thor debug LED 1 User Push-Buttons 1 SYS_RESET, 1 FORCE_RECOVERY Power Supply Voltage Input: +12 V DC, PCIE 8-pin Current Input: Max. Current 25 A What's Included FPGA Board 1 DC Fan (installed) 1 Mini USB Cable 1 Programming Cable 1 set 12V Power Adapter 1 SD Card 1 SMA cable 1 Dimensions Dimension 271.00mm x 200.00mm PCB Independent GND and Power Layers Resources & Downloads HEA13 User Manual (PDF, Simplified Chinese) Full documentation including Schematics, Demo projects (if applicable) will be provided by CodeRobin.