ABB FDNA-01 68469333 DeviceNet Communication Adapter Module

ABB FDNA-01 68469333 DeviceNet Communication Adapter Module Product Basic Information: Manufacturer: ABB Catalog number: FDNA-01 Non-hyphenated part number: FDNA01 ABB product ID: 68469341 Label code: 68469333 Software version: SW 2.31 Product family/series: ABB F-series fieldbus adapter modules Product type: DeviceNet adapter module / drive communication option module Network type: DeviceNet Country of origin: China Technical Specifications: Module type: DeviceNet adapter module Function: Connects compatible ABB drives to a DeviceNet network Network role: DeviceNet slave DeviceNet slave class: Class 2 slave Supported services: Explicit messaging, poll-response, and change-of-state / cyclic service Protocol: DeviceNet Transfer rates: 125, 250, or 500 kbit/s Network topology: Multi-drop Maximum bus length: 1200 m Serial communication type: Asynchronous, half duplex Drive connection: 20-pin connector to the drive Bus connection: Removable 5-pole screw type connector Bus connector terminals: V-, CAN_L, SHLD, CAN_H, V+ Maximum bus connector wire size: 2.5 mm² Power supply from drive: +3.3 VDC, +/- 5% Power supply from network: +24 VDC nominal, +11 to +30 VDC range Input current from drive: 180 mA typical, 300 mA maximum Input current from network: 20 mA typical, 50 mA maximum Indicators: Three bicolor LEDs for HOST, MODULE, and NETWORK status Degree of protection: IP20 Mounting method: Installed into compatible ABB drive option slot Bus termination: External DeviceNet termination required at network ends Recommended network termination: 121 ohm, 1%, metal film, 1/4 W resistor Compatible DeviceNet scanners: ODVA-compliant DeviceNet scanners supporting poll-response commands to Group 2 only slaves Compatible ABB drive families listed by ABB: ACS355, ACS380, ACS480, ACS580, ACH580, ACQ580, ACS880, DCS880, DCT880 Product Features: ABB FDNA-01 DeviceNet adapter module for compatible ABB drives Allows ABB drives to communicate on DeviceNet industrial networks Suitable for integration with DeviceNet-compatible controllers and PLC systems Supports drive control commands including start, stop, and run enable through DeviceNet Supports speed or torque reference communication to compatible drives Allows reading of drive status information and actual values through the network Allows compatible drive parameter values to be changed through DeviceNet communication Supports remote drive fault reset through the adapter module Three diagnostic LEDs provide host, module, and network status indication Removable 5-pole DeviceNet bus connector for network wiring Compact IP20 module design for installation directly into compatible ABB drive option slot Label code 68469333 and software version SW 2.31 shown on the product label Product Designed Use: Designed to connect compatible ABB drives, converters, and inverters to DeviceNet networks Used in industrial automation systems requiring DeviceNet communication with ABB drive hardware Suitable for compatible ABB ACS, ACH, ACQ, DCS, and DCT drive applications where DeviceNet fieldbus control is required Used for drive control, monitoring, reference transfer, parameter access, and fault reset through DeviceNet communication COUNTRY OF ORIGIN INFORMATION IS INCLUDED WHERE AVAILABLE. * Buyer is responsible for all customs duties, tariffs, brokerage fees, local levies, taxes, and VAT (if applicable).* KJ CONTROLS LTD IS NOT AN AUTHORIZED DISTRIBUTOR FOR ABB (3C4 - Upstairs Warehouse)