Lynx Technik AG OBD 1514 E 1GbE Ethernet Fiber Optic Bidirectional Transceiver Kit

Lynx Technik AG OBD 1514 E 1GbE Ethernet Fiber Optic Bidirectional Transceiver Kit The OBD 1514 E is a matched pair of compact Ethernet switches designed to extend the reach of 1GbE signals over long distances. The two switches are linked via simplex bi-directional fiber which operates at a constant 1Gbit/s speed. This pair of modules uses WDM (Wavelength-division Multiplexing) fiber technology in a closed loop environment, It functions as a simple Ethernet extender solution. The fiber link supports distances up to 10km* and provides a single, high speed 1Gbit/s error-free optical connection between the two locations. Each OBD 1514 E module has two standard RJ45 Ethernet ports. The complete system functions as a 4 ports Ethernet switch, providing two standard RJ45 Ethernet ports at each end bridged with fiber. For legacy systems, each Ethernet port can be set for automatic speed detection (10/100/1000) or forced to 10 Mbit/s. Each port uses auto crossover detection or can be forced manually if needed. These functions are available using the dip switch located on the device. Note: This system uses WDM and should only be used in point to point applications. WDM cannot be integrated into a CWDM system. Features Bidirectional send and receive over single fiber link Supports standard ethernet inputs up to 1 Gbit/s Closed loop WDM fiber system 3 port ethernet switch (1 fiber, 2 electrical) Auto (10/100/1000) port speed detection Manually force 10Mbit/s electrical speed (if needed) Fiber transceiver speed always 1 Gbit/s Auto or manual electrical crossover selection Distances up to 10km(6.2 miles)* over singlemode fiber Specifications Ethernet (electrical) for each module: 2 x Ethernet ports, RJ 45 Connectors. 10 BaseTUTP category 3,4 or 5 cable up to 328ft/100m (2 pairs) 100 BaseTXUTP category 5 cable up to 328ft/100m (2 pairs) 1000 BaseTXUTP category 5 cable up to 328ft/100m (4 pairs Auto detect bit rate (10/100/1000), or force to 10Mbit for each port (selectable) Automatic crossover detection or force manually for each port (selectable) Port speed / activity LED indication (next to Ethernet port) Ethernet Optical I/O: EEE 802.3z (1000BASE-X Gbit/s Ethernet over Fiber at 1Gbit/s (125 MB/s) 1 x fiber optic bidirectional connection Simplex LC/PC (Singlemode) Optical TX Wavelength: (WDM) OET 1514 A = 1310nm (Singlemode) OET 1514 B = 1330nm (Singlemode) Optical TX power: OET 1514 A -9dBm to -3dBm (Singlemode) OET 1514 B -9dBm to -3dBm (Singlemode) TX active LED on side of module Optical RX Sensitivity OET 1514 A -24dBm (Singlemode) OET 1514 B -24dBm (Singlemode) RX active LED on side of module Optical RX Wavelength (WDM) OET 1514 A = 1550nm (Singlemode) OET 1514 B = 1310nm (Singlemode) Max. distance* 10km* (6.2 miles*) Singlemode Power (each module) +12V DC @ 1.7W nominal – (supports 7 – 24V DC input range) Power Present LED on side of module Physical Size: (including connectors) each module Metric:140mm x 42mm x 22mm Inches: 5.51” x 1.65” x 0.86” Weight: (each module) 125g (4.4oz) Operational Temperature Range: Ambient 5 – 40ºC (41 – 104ºF) 90% Humidity (non-condensing)