300W Car Power Inverter 12V to 110V AC USB C A Ports Adapter

Output Control in Compact Form This unit converts 12V DC vehicle input into 110V AC using a modified sine wave output circuit rated at 300W. The housing integrates two AC outlets and four USB ports with a combined 24W USB output. Internal circuitry manages voltage conversion and load distribution within defined limits. The enclosure is molded plastic with internal heat dissipation channels and an integrated fan system. Current Flow and Device Interface The inverter connects through a standard 12V vehicle socket and draws DC input from the vehicle electrical system. Internal conversion circuitry steps up voltage to 110V AC while maintaining a modified sine waveform. USB-C and USB-A ports deliver up to 24W combined output for compatible devices. The dual AC outlets allow simultaneous connection of low-wattage electronics within the rated capacity. Installation and Vehicle Placement Insert the attached plug into a 12V cigarette lighter socket to power the unit. Position the inverter on a stable interior surface with ventilation space around the housing. Connect AC powered devices to the front outlets and USB cables to the corresponding ports. The compact size allows storage in a glove compartment or center console. Disconnect from the outlet when not in operation. Product Benefits: Multi-Port Output: Includes two AC outlets and four USB ports for connecting multiple devices within the rated load. 12V Vehicle Input: Operates through a standard 12V DC vehicle socket commonly found in dashboards and consoles. Compact Housing: Small form factor allows placement in cup holders, storage trays, or glove compartments. Integrated Cooling System: Built-in fan and vented casing regulate internal temperature during operation. Modified Sine Wave Output: Provides AC conversion suitable for low-wattage electronics and standard plug devices. Specifications: Material: ABS plastic enclosure with internal circuit board and cooling fan Dimensions: 6.5 × 3.2 × 1.8 in Weight: 0.72 lb Input Voltage: 12V DC vehicle power system Output Voltage: 110V AC Rated Power Output: 300W continuous Inverter Capacity: 250 VA USB Output: Up to 24W combined across USB-C and USB-A ports Number of Ports: 2 AC outlets and 4 USB ports Electrical Output Waveform: Modified sine wave Connection Type: Integrated 12V vehicle plug, AC socket interfaces, USB-C and USB-A ports Cooling Method: Internal fan with vented housing Standby Power Shutoff: Approximately 90 percent efficiency threshold Placement or Use Area: Interior cabin, center console, or cargo storage area Operating Note: Intended for low-wattage electronic devices within rated capacity limits