SLXD4 Wireless Half-Rack Receiver K59 606-650 MHz CH38

SLX-D Digital Wireless delivers transparent, 24-bit digital audio and rock solid RF performance with easy setup and rechargeability options in a suite of versatile wireless system configurations. Featuring industryleading digital wireless technology and design, the SLXD4 easily syncs wireless transmitters. A variety of interchangeable vocal microphone choices guarantees the right solution for a wide range of applications, from day-long conference to nighttime performances.Product Features Transparent 24-bit digital audio Extended 20 Hz to 20 kHz frequency range (microphone dependent) 118 dB dynamic range Digital predictive switching diversity 44 MHz tuning bandwidth (region dependent) 32 available channels per frequency band (region dependent) Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band Easy pairing of transmitters and receivers over scan and IR sync Compatible with Shure Wireless Workbench® control software Remote monitoring and control via ShurePlus™ Channels app Rugged metal construction Product SpecificationsSystem Specifications RF RF Carrier Frequency Range: K59 (606 - 650MHz) Working Range: 100 m (328 ft) RF Tuning Step Size: JB Band: 125 kHz All Other Bands: 25 kHz Varies by region. Image Rejection: >70 dB typical RF Sensitivity: −97 dBm at 10-5 BER Audio Latency: 3.2 ms High-Pass/Low Cut Filter: 150 Hz, –12 dB/octave Note: factory default is for the HPF to be off Audio Frequency Response: 20 Hz–20 kHz (+1, −2 dB) Audio Dynamic Range, A-weighted, 20 Hz–20 kHz, typical: 118 dB @1% THD Total Harmonic Distortion: <0.02% System Audio Polarity: XLR: Positive pressure on microphone diaphragm produces positive voltage on pin 2 with respect to pin 3 of XLR output. TRS: Postive pressure on microphone diaphragm produces positive voltage on the tip of the 6.35 mm (1/4-inch) with respect to the ring of the 6.35 mm output. Mic Offset Range: 0 to 21 dB (in 3 dB steps) Temperature Range Operating Temperature Range: 0 °F to 122 °F (−18 °C to 50 °C) Storage Temperature Range: −20 °F to 165 °F (−29 °C to 74 °C) SLXD4 Specifications Dimensions (H × W × D): 1.65 × 7.76 × 5.98 in (42 × 197 × 152 mm) Weight: 1.8 lb (816 g) without antennas Housing: Galvanized Steel Power Requirements: 15 VDC @ 600 mA Supplied by external power supply (tip positive) RF Input Spurious Rejection: >75 dB Typical Connector Type: BNC Impedance: 50 Ω Audio Output Gain Adjustment Range –18 to +42 dB in 1 dB steps Configuration 1/4" (6.35 mm): Balanced (Tip=audio +, Ring=audio –, Sleeve=ground) XLR: Balanced (1=ground, 2=audio +, 3=audio –) Impedance: 1/4" (6.35 mm): 1.3 kΩ (670 Ω Unbalanced) XLR (line): 400 Ω (200 Ω Unbalanced) XLR (mic): 150 Ω Full Scale Output: 1/4" (6.35 mm): +15 dBV differentially (+9 dBV single) XLR (LINE setting): +15 dBV XLR (MIC setting): –15 dBV Mic/Line Switch: 30 dB pad Phantom Power Protection: 1/4" (6.35 mm): Yes XLR: Yes Networking Network Interface: Single Port Ethernet 10/100 Mbps Network Addressing Capability: DHCP or Manual IP address Maximum Cable Length: 100 m (328 ft) What's in the Box? 1 x SLXD4 Receiver 2 x bulkhead adapters 2 x BNC connectors 2 x 1/4 wave antennas Rack Mount Kit