SKF 6204-C3 Bearing

SKF 6204 C3 Bearing - The drive-end bearing that takes the strain. The drive end of a pump motor does the hard yards — it's closest to the impeller, carrying the load every time the pump kicks on. The 6204 is the bearing built for that end: 20mm bore, 47mm outer, 14mm wide, with C3 clearance for the heat. It's the drive-end bearing in Onga's Pantera PPP range (Onga's 703612) and turns up in Davey pumps too. The bigger body shrugs off the thrust a working impeller throws back down the shaft. When the pump-end of the motor starts to grumble, this is the part that usually fixes it. Features Drive-End Strength: The larger bearing built for the impeller end of the motor, where the loads run highest. Onga & Davey Fit: The drive-end bearing in Onga's Pantera PPP range (part 703612) and a fit for Davey pump motors. C3 Heat Clearance: Extra internal room keeps it spinning freely as the motor warms through a long run. Specifications Bore (Inner Diameter): 20mm. Outer Diameter: 47mm. Width: 14mm. Internal Clearance: C3 (greater than standard). Construction: Single-row deep groove ball bearing. Onga Cross-Reference: 703612.