Skylotec Surface Mount Rope Access Anchor

SKYLOTEC Surface Mount Rope Access Anchor The SKYLOTEC Surface Mount Rope Access Anchor is a stainless steel stationary anchor point designed for trapezoidal steel sheet profiles. It is certified according to AS/NZS 5532:2013 and is designed for use on roofs and facades. This surface mount rope access anchor serves as a single anchor point for PPE, as an anchor point for rope access, and as a substructure for rope systems. The multifunctional design allows it to be used as both a single anchor point and system support in one. The pre-assembled anchor point is delivered ready for installation with stainless steel sheet metal screws and bulb-type rivets, making installation quick and easy for suitable trapezoidal sheet metal applications. Key Features Surface mount rope access anchor by SKYLOTEC Designed for trapezoidal steel sheet profiles Certified according to AS/NZS 5532:2013 Serves as a single anchor point for PPE Suitable as an anchor point for rope access Can be used as a substructure for rope systems Multifunctional: single anchor point and system support in one Delivered ready for installation thanks to pre-assembled support Supplied with stainless steel sheet metal screws and bulb-type rivets Stationary anchor point type Stainless steel construction Maximum number of persons: 1 Application areas: work on roofs and facades Applications Work on roofs Work on facades Trapezoidal steel sheet profiles PPE anchor point applications Rope access anchor point applications Rope system substructure applications Installation & Use Notes This system must only be installed by qualified individuals who are trained in the proper selection, use and maintenance of fall arrest systems and who hold a valid SKYLOTEC installer certification. The structural integrity and suitability of the roof structure must be verified by a structural engineer, unless a competent person can clearly confirm it is appropriate for system attachment. System design, supply, configuration, installation and certification must be carried out by a SKYLOTEC-approved installer in accordance with the manufacturer’s instructions and current industry standards. The surface mount rope access anchor is suitable for single person use and rescue in the case of a fall incident. The number of users connected to each anchor must not exceed the specified maximum capacity. This anchor is not designed for lifting or tethering tools, machinery or any form of equipment. No components of the anchor system may be altered, removed or tampered with unless explicitly authorised by the manufacturer. Inspection and recertification of fall anchors and equipment is required at least every 12 months by a competent person in accordance with manufacturer specifications and AS/NZS 1891.4:2009 Section 9. Specifications Product Surface Mount Rope Access Anchor Brand SKYLOTEC Application areas Work on roofs and facades Maximum lifetime 15 years Rope access technique Yes Usable in SEAL PAC No Minimum temperature -20 °C Maximum temperature 80 °C Type mounting base Trapezoidal sheet metal Mounting type Sheet metal screws, rivets Anchor point type Stationary anchor point Maximum number of persons 1 Maximum area required 0.15 m2 Material Stainless Steel Diameter bore 8 mm Diameter pillar 0 mm Hole spacing A 251 mm Hole spacing B 520 mm Standards AS/NZS 5532:2013 E-class number 40-02-01-90 Construction height 80 mm Foot plate length 550 mm Foot plate width 275 mm Colour Silver Net weight 2.20 kg Gross weight 2.20 kg Resources User Manual Datasheet FAQs What roof profile is this anchor designed for? The SKYLOTEC Surface Mount Rope Access Anchor is designed for trapezoidal steel sheet profiles. What is this anchor used for? It serves as a single anchor point for PPE, as an anchor point for rope access, and as a substructure for rope systems. Is this anchor certified? Yes. It is certified according to AS/NZS 5532:2013. Is this anchor suitable for rope access? Yes. What is the maximum number of persons? The maximum number of persons is 1. What material is the anchor made from? The anchor is made from stainless steel. What type of anchor point is it? It is a stationary anchor point. What mounting base is it designed for? The mounting base type is trapezoidal sheet metal. How is the anchor mounted? The mounting type is sheet metal screws and rivets. Is the anchor supplied ready for installation? Yes. The pre-assembled anchor point is delivered ready for installation with stainless steel sheet metal screws and bulb-type rivets. Can this anchor be used in SEAL PAC? No. What is the listed maximum lifetime? The listed maximum lifetime is 15 years. What temperature range is listed for this anchor? The listed minimum temperature is -20 °C and the listed maximum temperature is 80 °C. What is the maximum area required? The listed maximum area required is 0.15 m2. Can this anchor be used for lifting or tethering equipment? No. This anchor is not designed for lifting or tethering tools, machinery or any form of equipment. Who should install this anchor? This system must only be installed by qualified individuals who are trained in the proper selection, use and maintenance of fall arrest systems and who hold a valid SKYLOTEC installer certification. How often does the anchor need inspection or recertification? Inspection and recertification of fall anchors and equipment is required at least every 12 months by a competent person in accordance with manufacturer specifications and AS/NZS 1891.4:2009 Section 9.