Geekvape Q Replacement Pods

Geekvape Q Refill Pods Geekvape Q Pod Cartridges feature built-in mesh coils in 0.4Ω, 0.6Ω, 0.8Ω, and 1.2Ω resistances for RDTL and MTL vaping. Available in both top-fill and side-fill options with a 2ml refillable capacity. Each pod delivers boosted flavour and improved vapour production from the mesh coil's wider heating surface. Sold in packs of 3 at Vape Connect. Geekvape Q Replacement Pods use built-in mesh coils that heat e-liquid quickly and evenly across a larger surface area than standard round wire coils. The top-fill pods snap open at the mouthpiece for quick refilling, and the side-fill pods use a silicone plug for mess-free access. Both filling types support nic salt and freebase e-liquids across the full resistance range. Geekvape Q Refill Pods are compatible with Wenax Q, Wenax Q Pro, Wenax Q Mini, Wenax Q Ultra, Wenax Q2, Sonder Q, Sonder Q Lite, Sonder Q2, and Aegis Hero Q kits. The 0.4Ω side-fill pod is exclusively compatible with Wenax Q Pro, Wenax Q Ultra, and Sonder Q2 only. All remaining resistances fit across the wider range of compatible devices. Geekvape Q Pod Cartridges use built-in coils, eliminating the need for separate coil changes or maintenance. Swap the entire pod cartridge when the coil wears out and continue vaping in seconds. Higher resistance pods (0.8Ω to 1.2Ω) deliver a tight, cigarette-style MTL draw, and lower resistance pods (0.4Ω to 0.6Ω) produce larger vapour with an airier RDTL feel. Geekvape Q Pod Cartridges Features Geekvape Q Replacement Pods combine built-in mesh coils with top-fill and side-fill options in a 2ml refillable pod cartridge for RDTL and MTL vaping. Below are the 8 key features of Geekvape Q Pod Cartridges: Built-in mesh coils heat e-liquid across a wider surface area for boosted flavour and improved vapour production with zero separate coil changes. 4 resistance options, 0.4Ω (25 to 30W), 0.6Ω (18 to 25W), 0.8Ω (12 to 18W), and 1.2Ω (8 to 12W) covering RDTL and MTL vaping styles. 2ml refillable pod capacity with both top-fill and side-fill options for quick, mess-free refilling. Top-fill design snaps open at the mouthpiece for fast refilling without removing the pod from the device. Side-fill design uses a silicone plug with colour-coded resistances, Red (0.4Ω), Orange (0.6Ω), Light Green (0.8Ω), and Green (1.2Ω). Supports nic salt and freebase e-liquids, higher resistance pods pair best with 50/50 blends, and lower resistance pods perform best with 70% VG e-liquids. Compatible with 9 Geekvape kits including Wenax Q, Sonder Q, Aegis Hero Q, and Wenax Q Pro series devices. Sold in packs of 3 providing three pod cartridges per box for extended use between purchases. Geekvape Q Pod Types and Compatibility Geekvape Q Pod Cartridges are available in 4 resistances across two filling types, top-fill and side-fill. Each resistance covers a specific wattage range and vaping style. Top-Fill Pods Resistance Wattage Style E-Liquid 0.6Ω 18 to 25W RDTL 50/50 or 70% VG 0.8Ω 12 to 18W Loose MTL 50/50 or nic salt 1.2Ω 8 to 12W MTL 50/50 or nic salt Top-fill pods snap open at the mouthpiece for quick refilling. Snap off the cap, fill to the line, and firmly snap the cap back in place Side-Fill Pods Resistance Wattage Style E-Liquid Colour Code 0.4Ω 25 to 30W RDTL 70% VG Red 0.6Ω 18 to 25W RDTL 50/50 or 70% VG Orange 0.8Ω 12 to 18W Loose MTL 50/50 or nic salt Light Green 1.2Ω 8 to 12W MTL 50/50 or nic salt Green Side-fill pods use a clear-plastic design with a silicone plug for mess-free refilling. Each resistance is colour-coded for quick identification without checking the pod markings. Compatible Devices Device Compatible Resistances Geekvape Wenax Q 0.6Ω, 0.8Ω, 1.2Ω Geekvape Wenax Q Pro 0.4Ω, 0.6Ω, 0.8Ω, 1.2Ω Geekvape Wenax Q Mini 0.6Ω, 0.8Ω, 1.2Ω Geekvape Wenax Q Ultra 0.4Ω, 0.6Ω, 0.8Ω, 1.2Ω Geekvape Wenax Q2 0.4Ω, 0.6Ω, 0.8Ω, 1.2Ω Geekvape Sonder Q 0.6Ω, 0.8Ω, 1.2Ω Geekvape Sonder Q Lite 0.6Ω, 0.8Ω, 1.2Ω Geekvape Sonder Q2 0.4Ω, 0.6Ω, 0.8Ω, 1.2Ω Geekvape Aegis Hero Q 0.6Ω, 0.8Ω, 1.2Ω The 0.4Ω side-fill pod is exclusively compatible with Wenax Q Pro, Wenax Q Ultra, and Sonder Q2. All remaining resistances fit across the wider range of compatible devices listed above. How to Use Geekvape Q Pods Fill the pod with e-liquid, insert it into your Geekvape Q series device, and inhale to vape. The entire process takes under 2 minutes with zero coil changes or manual settings. Step 1: Remove the Pod from Packaging Take one Geekvape Q Pod Cartridge from the 3-pack. Remove any protective seals covering the pod contacts and mouthpiece. Step 2: Fill the Pod For top-fill pods, snap off the mouthpiece cap, squeeze e-liquid into the fill port, and snap the cap firmly back in place. For side-fill pods, peel the silicone plug, fill to the line, and push the plug back in. Avoid overfilling past the maximum line to prevent leaking and flooding. Step 3: Wait for Coil Saturation Allow 3 to 5 minutes for the built-in mesh coil to fully absorb the e-liquid. Skipping the wait period increases the risk of a dry hit on the first draw and reduces coil lifespan. Step 4: Insert into the Device Slide the pod into your Geekvape Q series kit until it clicks into place. The device detects the pod automatically with no buttons or settings required. Step 5: Inhale to Vape Draw from the mouthpiece to activate the device. Geekvape Q Pod Cartridges use draw activation, no fire button required. Higher resistance pods (0.8Ω–1.2Ω) deliver a tight MTL draw, and lower resistance pods (0.4Ω–0.6Ω) produce an airier RDTL draw. Step 6: Refill or Replace When Needed Top up the pod through the top-fill or side-fill port when e-liquid runs low. Replace the entire pod cartridge when flavour quality degrades or vapour production weakens, the built-in coil eliminates separate coil changes. What's in the Box? Every Geekvape Q Pod Cartridges pack contains everything needed to start vaping immediately with zero additional purchases. 3 x Geekvape Q Replacement Pod Cartridges (2ml each) FAQs About Geekvape Q Pod Cartridges What resistances are available in Geekvape Q Pods? Geekvape Q Pod Cartridges are available in 0.4Ω, 0.6Ω, 0.8Ω, and 1.2Ω resistances. The 0.4Ω and 0.6Ω options suit RDTL vaping, and the 0.8Ω and 1.2Ω options suit MTL vaping. What devices are compatible with Geekvape Q Pods? Geekvape Q Pod Cartridges are compatible with Wenax Q, Wenax Q Pro, Wenax Q Mini, Wenax Q Ultra, Wenax Q2, Sonder Q, Sonder Q Lite, Sonder Q2, and Aegis Hero Q kits. The 0.4Ω pod is exclusively compatible with Wenax Q Pro, Wenax Q Ultra, and Sonder Q2 only. What is the difference between top-fill and side-fill Geekvape Q Pods? Top-fill pods snap open at the mouthpiece for refilling. Side-fill pods use a silicone plug with colour-coded resistances, Red (0.4Ω), Orange (0.6Ω), Light Green (0.8Ω), and Green (1.2Ω). Both filling types hold 2ml of e-liquid and use built-in mesh coils. Do Geekvape Q Pods have built-in coils? Yes, Geekvape Q Pod Cartridges use built-in mesh coils that eliminate separate coil changes. Swap the entire pod cartridge when the coil wears out and continue vaping in seconds. Does the 0.4Ω Geekvape Q Pod fit all Q series kits? No, the 0.4Ω side-fill pod is exclusively compatible with Geekvape Wenax Q Pro, Wenax Q Ultra, and Sonder Q2 kits only. All remaining resistances fit across the wider range of compatible Q series devices. What e-liquids work best with Geekvape Q Pods? Higher resistance pods (0.8Ω to 1.2Ω) perform best with 50/50 freebase and nic salt e-liquids for MTL vaping. Lower resistance pods (0.4Ω to 0.6Ω) perform best with 70% VG e-liquids for RDTL vaping. Both freebase and nic salt blends work well across all resistances. What capacity are Geekvape Q Pods? Geekvape Q Pod Cartridges hold 2ml of e-liquid per pod cartridge. Both top-fill and side-fill options share the same 2ml capacity. How many pods come in a pack of Geekvape Q Pods? Geekvape Q Pod Cartridges are sold in packs of 3, with each pod holding 2ml of e-liquid. Each pack provides a combined e-liquid capacity of 6ml across all three pods.