All Accessories for Thinker X400 3D Printer
The Thinker X400 nozzle is made of hardened steel and is suitable for various filaments. It offers different sizes and is used for small to large models, depending on the desired speed and resolution.
- The Thinker X400 nozzle has a relatively long service life, approximately three months.
Specifications
- Accessories for Thinker X400
- 0.2mm nozzle, 0.2mm nozzle * 5, 0.4mm nozzle, 0.4mm nozzle * 5, 0.6mm nozzle, 0.6mm nozzle * 5, 0.8mm nozzle, 0.8mm nozzle * 5, 1.0mm nozzle, 1.0mm nozzle * 5, Nozzle * 5 (1 piece each of 0.2mm / 0.4mm / 0.6mm / 0.8mm / 1.0mm), Heat sink fan, Motherboard fan, Exhaust fan, Model cooling fan, Extruder, Mainboard, Extruder CANbus mainboard, Extruder Gear Module, Extruder motor, 110V-120V chamber heating module, 220V-240V chamber heating module, Extruder heating module (including thermistor and heating block), Thinker X400 Hot End Heating Upgrade Kit (350°C), Weighing sensor, Silicone sleeves*5, PEI Double-Sided gold board 410*410mm, Filter, Screen, Filament Runout Detection Module, Camera module
Variants (31)
- 0.2mm nozzle — 16.99 EUR — In stock
- 0.2mm nozzle * 5 — 79.00 EUR — In stock
- 0.4mm nozzle — 16.99 EUR — In stock
- 0.4mm nozzle * 5 — 79.00 EUR — In stock
- 0.6mm nozzle — 16.99 EUR — In stock
- 0.6mm nozzle * 5 — 79.00 EUR — In stock
- 0.8mm nozzle — 16.99 EUR — In stock
- 0.8mm nozzle * 5 — 79.00 EUR — In stock
- 1.0mm nozzle — 16.99 EUR — In stock
- 1.0mm nozzle * 5 — 79.00 EUR — In stock
- Nozzle * 5 (1 piece each of 0.2mm / 0.4mm / 0.6mm / 0.8mm / 1.0mm) — 79.00 EUR — In stock
- Heat sink fan — 10.99 EUR — In stock
- Motherboard fan — 10.99 EUR — In stock
- Exhaust fan — 10.99 EUR — In stock
- Model cooling fan — 12.99 EUR — In stock
- Extruder — 99.00 EUR — In stock
- Mainboard — 110.00 EUR — In stock
- Extruder CANbus mainboard — 29.99 EUR — In stock
- Extruder Gear Module — 59.99 EUR — In stock
- Extruder motor — 19.99 EUR — In stock
- 110V-120V chamber heating module — 39.00 EUR — In stock
- 220V-240V chamber heating module — 39.00 EUR — In stock
- Extruder heating module (including thermistor and heating block) — 29.99 EUR — In stock
- Thinker X400 Hot End Heating Upgrade Kit (350°C) — 49.99 EUR — In stock
- Weighing sensor — 12.99 EUR — In stock
- Silicone sleeves*5 — 9.99 EUR — In stock
- PEI Double-Sided gold board 410*410mm — 45.00 EUR — In stock
- Filter — 12.99 EUR — In stock
- Screen — 59.99 EUR — In stock
- Filament Runout Detection Module — 9.99 EUR — In stock
- Camera module — 18.99 EUR — In stock
AI Readiness
Good foundation, but some important product data is still missing.
84%