XBOT AGV drahtloses Lademodul und Dock, 24V 5A/10A oder 57V 10A

XBOT AGV drahtloses Laden Modul & Dock Dieses Produkt ist ein non-contact AGV charging System consisting of a stationary transmitter charging Dock und a receiver mounted on die kompatibel vehicle. It is intended to automate charging fuer eine configured AGV route. Die reviewed materials list die drahtloses Laden Modul as a non-standard, on-demand AGV configuration. Select die output specification that matches die target AGV Akku System. Bestaetigen die vehicle receiver, Spannungsklasse, charging profile, installation space und alignment Anforderungen vor der Bestellung. Den richtigen Typ waehlen Shopify-Typ SKU Listed output Rated power Stated charge time 24V5A XBOT-24V5A 25.2V DC, 5A 130W 4 to 6 hours 24V10A XBOT-24V10A 25.2V DC, 10A 350W 1 to 2 hours 56V10A XBOT-56V10A 57V, 10A 600W 1 to 2 hours Important Spannung note: die Shopify-Typ und SKU fuer die high-Spannung version are labelled 56V10A, while die reviewed Produkt material specifies a 57V output. Bestaetigen die required charging Spannung und Akku System mit die target AGV vor dem Kauf. System Parameter Input Spannung AC220V ±15% Input Strom 2A Charging clearance 10 to 20 mm Transmitter cooling Forced-air cooling Receiver cooling Natural convection cooling Operating Temperatur -20°C to 55°C Lagerung Temperatur -30°C to 70°C Horizontal X-axis alignment tolerance ±10 mm Horizontal Y-axis alignment tolerance ±10 mm Charging und Installation Guidance Maintain die listed clearance: position die transmitter und receiver at 10 to 20 mm during charging. Keep metal clear: die reviewed materials explicitly state that no metal objects may be present on die transmitter oder receiver surfaces while charging. Respect alignment limits: validate die parking repeatability of die AGV against die stated ±10 mm X/Y tolerance. Match die Spannungsklasse: use only die output Typ specified fuer die target Akku und vehicle charging System. Status und Diagnostic Indicators Die reviewed materials describe a green flashing light fuer eine normal standby Ladegeraet, red flashing after charging begins, red und green flashing together when die Akku is full und trickle charging, und alternating red/green flashing fuer eine abnormal condition mit a buzzer prompt. Listed buzzer prompts include communication error between Ladegeraet und AGV, excessive charge Strom oder nearby metal/damaged receiver, transmitter-receiver distance too close, und an over-Strom restart condition. Inspect die System und remove metal objects before restarting; qualified personnel should perform diagnosis und installation. FAQ Is this a standalone AGV Ladegeraet fuer einey vehicle? Nein. It requires a kompatibel transmitter-und-receiver installation und die correct Spannung configuration fuer die target AGV. Why must die Dock area be free of metal? Die reviewed Sicherheit notice specifically prohibits metal objects on die transmitter oder receiver surfaces during charging. Was ist enthalten? Die supplied images pruefen die Modul und parameter information, but not die final Lieferumfang. Bestaetigen transmitter, receiver, mounting parts und installation Anforderungen fuer die selected Typ vor der Bestellung.