Mission Darkness™ BadgeShield Pro

Mission Darkness™ BadgeShield Pro Wearable Faraday Phone Pouch with ID Badge Holder and Lanyard A wearable Faraday pouch sized for a phone, keeping it with its owner while blocking all wireless signals. A removable neck lanyard and a large transparent window display an event badge, identification card, evidence label, or asset tag on the outside. View Specifications Bulk & Agency Quotes TitanRF™ Shielded External closed 8.5" x 4.5" 21.6 x 11.4 cm Internal usage 7.5" x 4" 19 x 10.2 cm ID window 4" x 4" 10.2 x 10.2 cm Lanyard Removable Swappable, on a D-ring SKU Mission Darkness Where it works Credential visible. Device silent. Anywhere a card needs to be read at a glance and a phone needs to stay off the air. 01 Conferences & Events Attendees, staff, and vendors wear their pass in the window while phones stay sealed through a keynote, a closed briefing, or an embargoed demo. 02 Digital Forensics Shield a seized device and carry its evidence card, case number, or intake label in the window, so every pouch stays identifiable while it moves through the lab. 03 Secure Facilities & Meetings Confidential meetings, government sites, and controlled areas. Visitors keep facility credentials visible and devices shielded on their person rather than surrendering phones at the door. 04 Schools & Testing One labeled pouch per student, worn or stowed. Phones stay sealed through class and secure testing, and each pouch is matched to its owner by the name card. Also used for Corporate device disbursement Executive travel Contractor & visitor control Courtrooms Everyday carry The ID window One window, many labels. The window gives you a 4" x 4" (10.2 x 10.2 cm) display area with an open top. The square format takes badges in either orientation, so portrait event passes, landscape credentials, and standard ID cards all read clearly without opening the pouch. Evidence card, case number, or intake label for a device moving through chain of custody. Staff ID, visitor pass, contractor badge, or facility credential. Asset tag or inventory number for a managed device pool. Student name card, so every pouch returns to the right person. Event or vendor pass in the format the venue issues it. The lanyard Around the neck, or not at all. The neck lanyard clips to a D-ring at the top and comes off just as easily. Wear it as a badge holder, or remove it and carry the pouch on its own. Because it detaches, you can swap in a lanyard to match the event or the department. Removable lanyard, so one pouch covers both wearable and stowed use. Swap in a branded event lanyard, a department color, or a breakaway style. The D-ring also takes a carabiner or snap hook, so the pouch can clip to a bag, a strap, or a gear loop. The device stays with its owner instead of being collected or left behind. Hands-free through a venue, a checkpoint, a corridor, or a classroom. What is inside Everything that keeps a phone sealed. The same TitanRF™ shielding used across the Mission Darkness range, built into a wearable pouch sized for a phone. Complete Signal Isolation Once sealed, blocks cell signals including 5G, WiFi 2.4 and 5GHz, Bluetooth, GPS, RFID, NFC, and radio frequencies from low MHz to 40GHz. TitanRF Faraday Shielding High-shielding TitanRF Faraday Fabric lines every interior side with dual paired seam construction to keep the enclosed device fully offline. Large Transparent ID Window An oversized open-top front window shows a badge, ID, evidence card, credential, or asset tag without unsealing the pouch. Removable Lanyard & D-Ring The lanyard clips to a top D-ring and can be swapped to match an event or department. The D-ring also clips the pouch to a bag or strap. Double Roll Closure Fold the top over twice and press the hook-and-loop strip against the back panel. Ballistic Nylon Shell A water-resistant ballistic nylon exterior takes daily handling and protects the shielding fabric through repeated issue and return. Fits a Phone Plus Extras Sized for standard phones with typical cases, with room for earbuds or other small accessories. Built for Volume One of the more affordable pouches in the Mission Darkness phone lineup, intended for programs that issue and collect at scale. Sealed means silent When the top rolls down, the signals stop. Sealed inside, a phone cannot send or receive calls, texts, tracking pings, or remote commands, and nothing it captures can be transmitted out. The device can be accounted for without confiscating it, and cannot be reached, wiped, or locked out in transit. No calls, texts, notifications, or remote wipe commands reach the device. Remote access to the microphone, camera, and location is blocked. Anything already recording keeps recording, but nothing leaves the device until it is taken out. Provides EMF radiation reduction and EMP shielding for the enclosed device. Nothing can cross the opening. A cable left in the seal will let signals pass. Construction Every angle. Front and back D-ring, window, logo patch Hook-and-loop landing strip Rolled down and closed The details Specifications. Tested & certified Signal coverage Low MHz to 40GHzCell (5G), WiFi 2.4 & 5GHz, Bluetooth, GPS, RFID, NFC Shielding fabric TitanRF Faraday FabricLab tested and certified to MIL-STD 188-125 and IEEE 299-2006 Added protection EMF radiation reduction and EMP shielding for the enclosed device SKU Dimensions & fit Internal usage 7.5" L x 4" W x 0.5" D19 x 10.2 x 1.3 cm External closed 8.5" L x 4.5" W x 0.5" D21.6 x 11.4 x 1.3 cm ID window display 4" x 4"10.2 x 10.2 cm Weight 8 oz227 g Fit A phone with a typical case, plus earbuds or other small accessories Materials & finish Exterior Water-resistant ballistic nylon Interior High-shielding TitanRF Faraday Fabric with dual paired seam construction Front Transparent open-top ID window, plus front logo patch Carry Removable neck lanyard, clipped to a top D-ring Closure Double roll with hook-and-loop strip Commonly used to shield Cell phones Earbuds Building access cards Passports GPS units Keyfobs Credit cards Smart watches Transponders Two-way radios Also in the range Other phone Faraday bags. The BadgeShield Pro is the wearable option, built around the ID window and the lanyard. For a different shell, closure, or form factor, these are the closest alternatives. Faraday Phone Sleeve The slim ballistic nylon sleeve with an ID card slot. Hook-and-loop or NeoLok™ magnetic closure. View product Dry Shield Faraday Phone Sleeve Welded-seam TPU shell. The waterproof option for wet conditions. View product Non-Window Faraday Bag for Phones The essential fold-over bag. The incognito option with no window, lightweight and built for everyday carry. View product NeoLok Non-Window Faraday Bag Patented NeoLok™ magnetic roll-top for fast one-handed opening during repeated field handling. View product Not sure which fits the program? Compare the full lineup on the Keyfob & Phone Faraday Bags collection, or ask our team for a recommendation with your quote. Volume programs Priced to hand out by the hundred. One of the more affordable pouches in the Mission Darkness phone lineup, which makes it practical for programs that issue a shielded pouch to every attendee, visitor, employee, or student. Our team builds quotes for agencies, districts, venues, and corporate fleets. Request a Bulk Quote Custom Labeling Events Badge + Phone Forensics Labeled Transfer Facilities Visitor Issue Schools One Per Student Available Now Show the card. Silence the phone. Add the BadgeShield Pro to your cart, or explore the full range of phone Faraday bags. Equipping a venue, district, agency, or corporate fleet? Our team builds quotes at volume. Add to Cart Shop Phone Faraday Bags Corporate & Institutional Quotes