Ecoglo® E4061 Photoluminescent Contrast Strips with Gray Insert, 2" Wide
Model E4061 • E40 Series Ecoglo® E4061 Photoluminescent Step-Edge Contrast Strip – Gray Non-Slip Insert Improve stair-edge visibility, add durable traction and support luminous egress path marking with a low-profile 2-inch-wide photoluminescent contrast strip. The Ecoglo® E4061 Photoluminescent Contrast Strip combines protected photoluminescent step-edge marking with a hard-wearing gray silicon-carbide non-slip insert integrally bonded to a rigid aluminum base. The system provides visible step-edge definition under normal lighting while providing photoluminescent guidance when lighting levels are reduced. At 2 inches wide, the E4061 provides a compact solution for combining luminous stair-edge marking and non-slip protection on commercial stairways, exit stairs and other egress applications. The Ecoglo® E40 Series is designed for stairs where luminous path markings are required by applicable project or code requirements. Product Configuration Model E4061 is the gray contrast configuration in the Ecoglo® E40 Series. The gray silicon-carbide section provides non-slip traction and visible color contrast. The adjacent protected photoluminescent section provides luminous visibility. The gray insert itself does not glow. ✔ Model E4061 ✔ 2-Inch-Wide Profile ✔ Gray Non-Slip Insert ✔ UL 1994 & ULC 572 Listed Photoluminescent Visibility High-performance photoluminescent material provides step-edge visibility in light and dark conditions without electrical power, batteries or wiring. Durable Non-Slip Surface Hard-wearing silicon-carbide material is integrally bonded to the aluminum substrate to provide durable traction in high-traffic stair applications. Gray Step-Edge Contrast The neutral gray insert provides visible step-edge contrast where it differs from the surrounding stair finish while maintaining a clean architectural appearance. Indoor & Outdoor Use The E40 Series is intended for indoor and outdoor installations and has been tested for accelerated UV and weathering exposure. Ecoglo® E4061 Product Configuration E4061 combines Ecoglo® photoluminescent step-edge technology with a gray silicon-carbide contrast strip on a rigid aluminum base. Manufacturer Model E4061 Product Series E40 Series Product Type Photoluminescent Contrast Strip Contrast Color Gray Recommended Applications Exit stairways Emergency egress routes Commercial stairways High-rise buildings Office buildings Hotels and hospitality Educational facilities Public facilities Photoluminescent Visibility + Non-Slip Step-Edge Protection The E4061 combines photoluminescent step-edge identification and durable silicon-carbide traction in one low-profile strip. Visible step edge Photoluminescent technology and contrasting non-slip material help define the leading edge under changing lighting conditions. Gray contrast surface The gray silicon-carbide section provides traction and a neutral architectural appearance. No electricity required The passive photoluminescent system operates without wiring, batteries or ongoing electrical power. Technical Specifications Manufacturer: Ecoglo® Manufacturer Model: E4061 Product Series: E40 Series Product Type: Photoluminescent step-edge contrast strip Base: Rigid aluminum Non-Slip Material: Silicon carbide Contrast Color: Gray Photoluminescent: Yes Overall Width: 2 inches / 51 mm Approx. Profile Thickness: 0.1 inch / 1.8 mm Weight: Approximately 0.138 lb per linear foot Environment: Indoor and outdoor Sizes and Ordering Width: 2 inches / 51 mm Standard Lengths: 8 ft and 10 ft Cut-to-Length: Available with ± 1/8-inch tolerance Weight: Approximately 0.138 lb/ft Installation Information Ecoglo® specifies installation of the E40 Series using a premium polyurethane adhesive. The rigid aluminum base helps spread applied loads across a greater area of adhesive and is designed to work on both smooth and textured surfaces. Primary Installation Premium polyurethane adhesive/sealant. Mechanical Fasteners Mechanical fasteners are an available option for applicable indoor installations. Outdoor Installation Manufacturer instructions state that mechanical fasteners should not be used outdoors. Listings and Performance Testing Manufacturer documentation identifies the E40 Series as UL 1994 and ULC 572 Listed and documents performance testing for photoluminescent brightness, environmental durability, abrasion, washability, radioactivity, toxicity and flammability. ✔ UL 1994 & ULC 572 Listed ✔ ASTM E2073 brightness testing ✔ DIN 67510 Part 1 ✔ ISO 17398 ✔ ASTM G155 UV exposure ✔ ASTM B117 salt-spray testing ✔ ASTM C1026 freeze-thaw testing ✔ ASTM D1242 abrasion testing ✔ ASTM F510 abrasion testing ✔ ASTM D4828 washability testing ✔ ASTM D3648 radioactivity testing ✔ Bombardier SMP 800-C toxicity testing ✔ ASTM E162 flammability testing ✔ ASTM D635 flammability testing Building, Fire & Life-Safety Code References Ecoglo® documentation references the E40 Series for projects involving the following luminous egress path-marking provisions. Final product selection and code compliance should be confirmed with the project designer and authority having jurisdiction. ✔ IBC / IFC Section 1025 ✔ NFPA 101 ✔ NYC Building Code 2018 BC 1025 ✔ NYC Local Law 141 of 2013 ✔ NYC Local Law 26 of 2004 ✔ California Building Code Section 1025 ✔ Connecticut Fire Safety Code Section 1026 Why Specify the Ecoglo® E4061? 2-in-1 stair safety Combines photoluminescent step-edge visibility with durable silicon-carbide traction. Neutral gray finish Gray provides a more understated architectural contrast than black or yellow while maintaining a durable non-slip surface. Passive emergency guidance Photoluminescent visibility requires no batteries, wiring or electrical power. Indoor & outdoor durability Designed for demanding environments with documented UV and weathering resistance. Energy-Free, Recyclable Egress Safety ♻ Zero electrical energy consumption ♻ Aluminum-based and recyclable ♻ Approx. 20% recycled aluminum content ♻ Non-radioactive and non-toxic ♻ May support applicable LEED credits ♻ Low-VOC recommended adhesive Frequently Asked Questions What is Ecoglo® E4061? E4061 is a 2-inch-wide E40 Series photoluminescent step-edge contrast strip with a gray silicon-carbide non-slip section on a rigid aluminum base. Does the gray insert glow? No. The gray silicon-carbide surface provides traction and color contrast. The adjacent protected photoluminescent section provides luminous visibility. How wide is the E4061? The E40 Series contrast strip is approximately 2 inches or 51 mm wide. Can Ecoglo® E4061 be installed outdoors? Yes. The manufacturer identifies the E40 Series for both indoor and outdoor use and documents accelerated UV/weathering testing. Is the E4061 UL Listed? The manufacturer identifies the E40 Series as UL 1994 and ULC 572 Listed. Does E4061 need electricity? No. It is a passive photoluminescent system with zero electrical energy consumption. What lengths are available? Standard manufacturer lengths are 8 ft and 10 ft. Cut-to-length sizes are available with a stated tolerance of approximately ± 1/8 inch. How is E4061 installed? Ecoglo® specifies premium polyurethane adhesive as the primary installation method. Mechanical fasteners are optional for applicable installations but should not be used outdoors. What is the difference between E4071, E4061 and E4051? All three are E40 Series photoluminescent contrast strips. E4071 has a black insert, E4061 has a gray insert, and E4051 has a yellow insert. Specify the Ecoglo® E4061 Select an available length or contact us for commercial quantities, custom sizing, technical documentation and project-specific photoluminescent egress requirements. View Technical Data Sheet Request a Quote
2 in x 2 ft, 2 in x 4 ft, 2 in x 6 ft, 2 in x 8 ft, 2 in x 10 ft