K SERIES TURBO 1-4 HD STRAIGHT CUT, CUFF, FINAL DRIVE AND FORK FULL RACE SET

FWD OR AWD Replaceable dog rings on all gears. 2.8/1.9/1.29/1.0 Straight cut Full size input shaft with no step down. Extra spline length to accommodate triple disc clutches. 5mm bigger gears over stock Custom Forged 3-4 Fork for new slider location. Uses stock 1-2 fork Have to use 6spd 5-6 and reverse fork 5-6 fork will need to be cut off at the slider location as it will hit cuff. 1-4 only. No other gears can be added. **AS A PRE CAUTION, MUST PUT A SPOT WELD ON THE ROLL PIN ONCE YOU CHOOSE IF USING FOR STOCK LOCATION OR HD LOCATION.. ** IF FAIL TO DO SO, ROLL PIN CAN VIBRATE LOOSE OVER TIME AND CAUSE SERIOUS DAMAGE TO GEARSET!! We require assembly to be checked in a window case. That is a "cut top half case on 4 sides to see thru window, to make sure all lines up and engages fully and smoothly. Simulates a locked in top bearing and fully functioning gear set." Saves hassle and risk of doing damage putting it in the car blind. Hp rating 1400 Professional install required