HOC RM32 Tamping Rammer Engine Assembly Parts
HOC RM32 Tamping Rammer Engine Assembly Parts HOC RM32 Tamping Rammer Engine Assembly Parts are replacement components for servicing, repairing, and maintaining the engine assembly section of the RM32 tamping rammer. Use the main image diagram and corresponding reference number to identify the exact engine, bracket, cover, bolt, washer, locknut, wire clip, engine seat pin, or other component required. These parts are intended for equipment owners, contractors, repair shops, and service technicians maintaining compatible HOC RM32 tamping rammers. KEY FEATURES DIAGRAM-BASED PART IDENTIFICATION: Each engine assembly component corresponds to a numbered reference on the RM32 main image diagram. Matching the diagram number with the parts list makes it easier to identify the correct replacement component before ordering. ENGINE ASSEMBLY COMPONENT COVERAGE: Available parts include the GX35 engine, engine bracket, engine seat pin, crankcase cover, left and right covers, fasteners, washers, locknuts, and wire clip. This allows individual components to be replaced according to the repair requirements. GX35 ENGINE REPLACEMENT: The engine itself is listed as an available replacement under reference number 6. This provides an engine replacement option when service requirements extend beyond individual mounting or cover components. MOUNTING AND SUPPORT COMPONENTS: The engine bracket, cylindrical engine seat pin, bolts, washers, and locking hardware provide replacement options for components used to mount and secure the engine assembly. Matching each part to its diagram position helps ensure the correct hardware is selected. COVER AND PROTECTION COMPONENTS: Right and left cover components are available individually for replacing damaged or worn engine assembly protection. This allows technicians to service exterior components without replacing unrelated parts. RM32 COMPATIBILITY: These replacement parts are intended for the engine assembly of the HOC RM32 tamping rammer. Always verify the machine model, main image diagram, and corresponding reference number before ordering. APPLICATIONS / USE CASES ENGINE ASSEMBLY REPAIRS: Replace damaged or worn components within the RM32 engine assembly using the numbered diagram for identification. Individual part availability supports targeted repairs without unnecessarily replacing other components. ENGINE REPLACEMENT: The GX35 engine is available as reference number 6 for repairs requiring replacement of the engine itself. Confirm the RM32 model and diagram reference before selecting the engine. ENGINE MOUNTING SERVICE: Engine brackets, engine seat pins, bolts, washers, spring washers, and locknuts can be replaced when servicing the engine mounting system. Correct mounting components help keep the engine properly positioned within the machine. COVER REPLACEMENT: Replacement right and left covers are available for servicing damaged engine assembly covers. Individual cover availability makes it easier to replace only the component identified on the diagram. SHOP AND FIELD MAINTENANCE: The numbered parts format simplifies identification for technicians performing repairs in a service shop or on the jobsite. Referencing the main image diagram can also improve communication when ordering replacement components. WHAT’S INCLUDED Selected HOC RM32 engine assembly replacement part Part supplied according to the selected diagram reference number AVAILABLE ENGINE ASSEMBLY PARTS SET A (#1-5) 1 - SOCKET HEAD BOLT: Replacement socket head bolt corresponding to reference number 1 on the RM32 engine assembly diagram. 2 - FLAT WASHER: Replacement flat washer identified as reference number 2 for the applicable engine assembly fastening point. 3 - R. COVER CRANKCASE: Replacement right crankcase cover corresponding to reference number 3 for the applicable RM32 engine assembly location. 4 - WIRE CLIP: Replacement wire clip identified as reference number 4 for securing the applicable wiring within the engine assembly. 5 - SOCKET HEAD BOLT: Replacement socket head bolt corresponding to reference number 5 for the specified engine assembly connection. SET B NON-HONDA OR SET C HONDA (#6-20) 6 - ENGINE GX35: Replacement GX35 engine identified as reference number 6. This is the engine option listed for the compatible HOC RM32 tamping rammer assembly. 7 - HEX BOLT: Replacement hex bolt corresponding to reference number 7 for securing the applicable engine assembly component. 8 - FLAT WASHER: Replacement flat washer identified as reference number 8 for the specified mounting or fastening location. 9 - R. COVER: Replacement right cover corresponding to reference number 9 for the RM32 engine assembly. 10 - CYLINDRICAL PIN, ENGINE SEAT: Replacement cylindrical engine seat pin identified as reference number 10. This component is used at the applicable engine mounting location shown on the main diagram. 11 - SOCKET HEAD BOLT: Replacement socket head bolt corresponding to reference number 11 for the specified engine assembly fastening point. 12 - WASHER: Replacement washer identified as reference number 12 for the applicable engine assembly connection. 13 - HEX BOLT: Replacement hex bolt corresponding to reference number 13 for securing the specified engine assembly component. 14 - ENGINE BRACKET: Replacement engine bracket identified as reference number 14. The bracket supports the engine at the applicable mounting location within the RM32 assembly. 15 - HEX BOLT: Replacement hex bolt corresponding to reference number 15 for the applicable engine bracket or assembly connection. 16 - HEX FLANGE LOCKNUT: Replacement hex flange locknut identified as reference number 16 for securely fastening the specified engine assembly connection. 17 - SPRING WASHER: Replacement spring washer corresponding to reference number 17 for maintaining fastening tension at the applicable assembly point. 18 - L. COVER: Replacement left cover identified as reference number 18 for the RM32 engine assembly. 19 - HEX BOLT: Replacement hex bolt corresponding to reference number 19 for the specified engine assembly fastening location. 20 - HEX BOLT: Replacement hex bolt identified as reference number 20 for the applicable connection shown on the engine assembly diagram. TECHNICAL SPECIFICATIONS COMPATIBLE MACHINE: HOC RM32 Tamping Rammer ASSEMBLY: Engine assembly ENGINE: GX35 PART IDENTIFICATION METHOD: Main image exploded-view diagram reference number AVAILABLE REFERENCE NUMBERS: 1 through 20 PART TYPES: Engine, engine bracket, crankcase cover, right cover, left cover, engine seat pin, wire clip, socket head bolts, hex bolts, washers, spring washer, and hex flange locknut FREQUENTLY ASKED QUESTIONS Q: How do I identify the correct RM32 engine assembly part? Check the main image diagram and locate the reference number for the component you need. Match that number with the available engine assembly parts list before ordering. Q: Are all 20 engine assembly parts included together? No. The listed items represent individual replacement parts available for the RM32 engine assembly. Select the specific diagram reference number corresponding to the part required. Q: Is the engine available as a replacement part? Yes. The GX35 engine is listed as reference number 6. Verify the machine model and diagram before ordering to confirm compatibility. Q: Are the engine covers available separately? Yes. The right cover is listed as reference number 9 and the left cover is reference number 18. A right crankcase cover is also listed separately as reference number 3. Q: What should I check before ordering an RM32 engine assembly part? Confirm that the machine is an HOC RM32 tamping rammer, then use the main image diagram to identify the required reference number. Match both the number and part name with the listing before placing an order.
#1-5 SET A, #6-20 - SET B NON-HONDA, #6-20 - SET C HONDA