BERK-TEK | 10136752 LANmark-6 CAT6 Riser 1000ft 500MHz CMR UTP Ethernet Cable

BERK-TEK LANmark-6 CAT6 Riser Cable - 1000ft Pull BoxThis BERK-TEK LANmark-6 riser cable delivers dependable Category 6 performance for backbone and riser runs that demand a CMR-rated, plenum-free construction. Built on 24 AWG solid bare copper conductors, it is engineered for installers who need certified performance, clean pulls, and long-term reliability in commercial riser pathways.Performance & ConstructionCharacterized to 500 MHz, the cable comfortably supports applications extending to 250 MHz, including 2.5/5GBASE-T, 1000BASE-T, 100BASE-TX, and 10BASE-T. The four unshielded twisted pairs are constructed without a center spline, which keeps the cable flexible and easy to terminate while maintaining pair geometry.Power over Ethernet ReadyCertified for IEEE 802.3 PoE Types 1 through 4 (up to 100 watts), Cisco UPOE and UPOE+ (90 watts max), and Power over HDBaseT (PoH) at 95 watts max, this riser cable is suited for powering IP cameras, wireless access points, and other PoE endpoints.Standards & ComplianceETL verified to Cat 6, compliant with ANSI/TIA-568.2 Cat 6 and ISO/IEC 11801 2nd Edition Class E, UL 444 listed, and RoHS compliant. The CMR riser rating meets UL 1666 for vertical riser installations.Physical Specifications Conductor: 24 AWG solid bare copper Conductor diameter: 0.0210 in (0.5334 mm) Max insulated conductor diameter: 0.0380 in (0.9652 mm) Nominal cable diameter: 0.205 in (5.21 mm) Nominal cable weight: 19.5 lb/kft (29.0 kg/km) Pairs: 4 Jacket: UTP, CMR riser rated (UL 1666) Nominal velocity of propagation: 69% Electrical Specifications DC resistance: Max 9.38 ohm/100 m DC resistance unbalance: Max 5% Mutual capacitance: Nom 5.1 nF/100 m at 1 kHz Capacitance unbalance (pair-to-ground): Max 330 pF/100 m at 1 kHz Delay skew: 45 ns/100 m max Temperature Ratings Storage/operating: -20 C to +60 C (-4 F to +140 F) Installation: +5 C to +50 C (+41 F to +122 F) Listed temperature: +75 C (+167 F)