Dynamic Cold Therapy 1.0 HP Cold Plunge Chiller with Heat & Wi-Fi

Overview The Dynamic Cold Therapy 1.0 HP Cold Plunge Chiller with Heat & Wi-Fi (DCT-SY-10-PRO) brings convenient temperature control to your cold plunge setup without the daily hassle of adding ice. Designed for compatible plunge tubs holding up to 150 gallons, this cooling and heating system lets you adjust water temperatures from 37°F to 85°F for cold-water immersion or a warmer soaking experience. Powered by a 1.0 HP rotary compressor, the chiller combines temperature management with a built-in circulation pump, two-stage water filtration, and automated ozone sanitation. Its splash-resistant touchscreen and Wi-Fi connectivity through the Tuya Smart app make it easy to monitor and adjust settings. Designed for indoor and covered outdoor installations, the DCT-SY-10-PRO is a practical choice for homeowners looking to add reliable water temperature control to a compatible cold plunge tub. Features Powerful 1.0 HP Compressor: A rotary compressor provides cooling and heating performance for compatible cold plunge tubs holding up to 150 gallons. Cold and Heat Functions: Adjustable water temperatures from 37°F to 85°F allow you to switch between cold-water immersion and warmer water settings. Ice-Free Temperature Control: The system cools and maintains water temperature electronically, reducing the need to purchase, transport, and add ice before each session. Efficient Cooling Performance: The manufacturer lists an approximate cooling rate of 1°F–3°F every 20 minutes, depending on ambient temperature, water volume, and operating conditions. Wi-Fi Smart Controls: Connect through the Tuya Smart mobile app to monitor the system, adjust temperature settings, and use supported remote-control and scheduling functions. Splash-Resistant Touchscreen: An integrated digital display provides convenient access to the chiller's temperature and operating settings. Self-Priming Circulation Pump: The built-in water pump circulates water between the chiller and a compatible cold plunge tub without requiring a separate external circulation pump. Two-Stage Water Filtration: Integrated filtration and a replaceable 20-micron filter help capture particulates and support water clarity during regular operation. Automated Ozone Sanitation: A built-in ozone system provides supplemental water treatment as part of the manufacturer's recommended maintenance routine. Quick-Connect Hose System: Included inlet and outlet hoses simplify connections to compatible Dynamic Cold Therapy plunge tubs. Standard 120V Power: Designed to operate from a suitable standard 120-volt electrical outlet with built-in ground-fault protection. Indoor and Covered Outdoor Placement: Suitable for indoor installations and properly protected covered outdoor spaces, subject to the manufacturer's placement requirements. Replaceable Filters: Includes a preinstalled filter and two replacements, along with a filter-housing wrench for routine servicing. Specifications Specification Details Brand Dynamic Cold Therapy Model / SKU DCT-SY-10-PRO Product Type Cold Plunge Water Chiller and Heating System Chiller Series Basic Edition Compressor 1.0 HP Rotary Compressor Functions Water Cooling and Heating Temperature Adjustment Range 37°F–85°F Recommended Maximum Water Volume Up to 150 Gallons Manufacturer-Listed Cooling Rate Approximately 1°F–3°F Every 20 Minutes; Actual Performance Varies Product Dimensions 15" L × 21" W × 22" H (Manufacturer Website Orientation) Product Weight 89 lbs Electrical Supply Standard 120V Outlet; Confirm Receptacle and Circuit Requirements Electrical Protection Built-In Ground-Fault Protection Circulation System Integrated Self-Priming Water Pump Water Filtration Two-Stage Filtration System Replacement Filter Rating 20 Microns Sanitation System Automated Ozone Sanitation On-Unit Controls Splash-Resistant Digital Touchscreen Wireless Connectivity Wi-Fi via Tuya Smart App; 2.4 GHz Network Required for Setup Water Connections Inlet and Outlet with Included Connection Hoses Compatible Placement Indoor or Covered Outdoor Installation Manufacturer Warranty 1-Year Limited Warranty; Manufacturer Terms Apply UPC / GTIN 850041998886 What's Included Dynamic Cold Therapy DCT-SY-10-PRO 1.0 HP cooling and heating chiller Integrated self-priming circulation pump Two-stage water-filtration system with preinstalled filter Two replacement 20-micron filters Integrated automated ozone sanitation system Pair of inlet and outlet connection hoses Quick-connect fittings and applicable connection components Filter-housing wrench Built-in digital touchscreen and Wi-Fi functionality This listing is for the cooling and heating chiller system. A cold plunge tub is not included. Confirm the tub's inlet and outlet fittings, water capacity, and compatibility before purchasing. Installation The Dynamic Cold Therapy DCT-SY-10-PRO is intended for use with compatible cold plunge tubs holding up to 150 gallons. The system includes a circulation pump and connection hoses, reducing the need for a separately purchased pump. Proper hose configuration, suitable electrical power, and adequate water flow are essential before startup. Electrical Requirements: The chiller operates from a standard 120V electrical outlet and includes built-in ground-fault protection. Connect it only to a suitable grounded outlet that meets the manufacturer's requirements and applicable electrical codes. Have a qualified electrician confirm outlet suitability if necessary. Do not use extension cords or unapproved electrical adapters. Indoor and Covered Outdoor Placement: Install the chiller on a stable, level surface in a well-ventilated location. It is rated for indoor and covered outdoor use, not unrestricted exposure to rain or standing water. Protect the unit from direct weather exposure and maintain the ventilation clearances specified in the installation instructions. Hose Connections: The manufacturer's product guide specifies connecting the cold plunge tub outlet to the chiller inlet and the chiller outlet to the tub inlet. Check the fitting gaskets and secure the hoses according to the manufacturer's instructions to prevent leaks or air entering the circulation system. Water Flow Preparation: Fill the compatible plunge tub to the recommended operating level and remove any shipping caps or plugs from the water inlet and outlet ports. Verify that water can circulate freely before activating the chiller. Never operate the system without proper water flow, as dry operation can damage the equipment. Wi-Fi Setup: The manufacturer's operating guide specifies a 2.4 GHz Wi-Fi network for initial connectivity. Follow the unit's on-screen setup process and the Tuya Smart app instructions to connect a compatible mobile device. Compatibility: The chiller is designed to integrate with compatible Dynamic Cold Therapy tubs. Connection to a different tub brand or an existing plunge system should not be assumed without confirming fitting size, water volume, circulation requirements, and manufacturer compatibility. Operation and Usage The DCT-SY-10-PRO provides adjustable water cooling and heating through its digital touchscreen or supported Wi-Fi controls. After proper installation and confirmation of water circulation, set the desired water temperature within the manufacturer's listed range of 37°F–85°F. The system regulates its cooling and heating operation as needed to approach and maintain the selected setting. Starting the System: Confirm the plunge tub is filled, all hoses are correctly connected, and water flow is unobstructed. Activate the chiller using its electrical safety controls and digital touchscreen according to the manufacturer's startup instructions. Cooling Mode: Select a lower target water temperature for cold-water immersion. The manufacturer reports approximately 1°F–3°F of cooling every 20 minutes under applicable conditions. Cooling time varies with starting water temperature, ambient conditions, tub insulation, and total water volume. Heating Mode: Set a higher water temperature for a warmer soaking experience. The system supports temperatures up to 85°F, so it should not be confused with a high-temperature hot tub heater. Wi-Fi and App Control: Use the Tuya Smart app to access supported remote temperature management and scheduling functions when the chiller is connected to a compatible Wi-Fi network. Water Circulation and Filtration: The built-in pump circulates water through the filtration system, while the replaceable 20-micron filter helps capture debris and suspended particles. Ozone Sanitation: The automated ozone system provides supplemental water treatment. Ozone and filtration do not replace routine cleaning, water-quality testing, appropriate sanitation practices, or periodic water replacement. Filter Maintenance: Check the filter regularly and replace it as needed based on usage and water conditions. Dynamic Cold Therapy generally recommends replacement around every four weeks, with more frequent changes when necessary. Water Quality: Monitor water cleanliness and the manufacturer's recommended pH and alkalinity conditions. Drain and refill the tub when required by water quality, usage, and the manufacturer's maintenance guidance. After Use: Allow the system to regulate the selected water temperature when configured for continued operation, or switch it off according to the manufacturer's instructions when it will not be used. Follow the prescribed maintenance routine and inspect hoses and fittings periodically. Important: Cold-water immersion places stress on the body, particularly at low water temperatures. Begin with conservative temperatures and short sessions, avoid using the plunge alone, and exit immediately if you experience dizziness, chest discomfort, breathing difficulty, or unusual symptoms. Consult a healthcare professional before cold immersion if you have cardiovascular concerns or other relevant medical conditions. Never operate the chiller with restricted water flow or damaged electrical components.