Signature Light Filtering Double Cellular Shades

Our Signature Light Filtering Double Cellular Shades are for rooms that should stay bright but feel more comfortable. Two rows of 1/2" cells trap two pockets of air at the window, so the shade filters daylight into a warm, even glow while it slows the heat and cold coming through the glass. The double layer also gives the fabric a richer, more opaque look than a single cell, with better daytime privacy and noticeably softer sound. Choose cordless, top-down/bottom-up or continuous-loop lift for every window in the house. Shown custom-fit, with a color-matched headrail and bottom rail. Why You Will Love These Shades Soft, Even Light: The spunlace fabric diffuses sunlight to cut glare and hot spots while keeping the room bright and private during the day. 1/2" Double Cell Construction: Two rows of 1/2" cells stacked back to back put two air pockets between the glass and the room, so a light filtering fabric insulates like a much heavier shade. Comfortable Year Round: Two layers of air pockets keep the room noticeably more comfortable, holding back summer heat and winter cold while the light still comes through. A real help with heating and cooling bills. Three Ways to Lift: Cordless lift is standard. Upgrade to top-down/bottom-up, or choose a continuous cord loop on the left or right for large, heavy shades. Up to 144" Wide: Single shades are made up to 120" wide. Wider windows are built as two shades on one headrail so the opening reads as one treatment. Clean, Coordinated Hardware: An aluminum headrail and bottom rail color-matched to the fabric, hidden snap-in brackets and a dust cover that keeps debris off the cells. Ten Designer Colors: Crisp White Radish and soft Llama, warm French Pastry and Gingerroot, rich Taupe Notch, cool Elegant Dove and Raindance greys, airy Atlantic Frost, deep Canadian Tuxedo navy and dramatic Gala Night. Safer for Kids and Pets: The standard cordless lift has no exposed cords. Hold-down brackets for doors are included free on request. Rooms That Want Light and Insulation Living and family rooms: Keep the daylight, lose the drafts and the glare. Sunrooms: Tame heat gain without turning the room dark. Dining rooms: A warm, flattering glow over the table. Bedrooms that do not need full blackout: Gentle morning light with real privacy. Older windows: Two air pockets add comfort where the glass falls short. Choose the Right Lift for Each Window Cordless (standard): Raise or lower the shade with a gentle push or pull on the bottom rail. Available from 9" to 144" wide and up to 86" high. Top-down/bottom-up: Two moving rails let you lower the shade from the top for daylight and privacy at the same time. Available from 15" to 96" wide and up to 86" high. Continuous cord loop: A clutch-driven loop on the left or right handles tall, heavy shades with ease. Available from 18 1/2" to 144" wide and up to 144" high, up to 17,000 square inches of fabric. Sky pole: For cordless or top-down/bottom-up shades out of reach, add a 6 ft or 9 ft sky pole. Shades over 24" wide work best with two poles. What "Light Filtering" Means in Your Room Light filtering sits between sheer and blackout. Daylight passes through the fabric and spreads evenly across the room, but you cannot see through it during the day. After dark, with lights on inside, silhouettes can show from outside, so pair it with blackout or drapery in rooms that need night-time privacy. Cooler Summers, Warmer Winters Windows are where most of a room's heat comes in on a summer afternoon and slips out on a winter night. Two layers of air pockets keep the room noticeably more comfortable, holding back summer heat and winter cold while the light still comes through. Close the shades on hot afternoons and cold evenings and you will feel the difference. Compare Our Signature Cellular Shades Fabric Light Control Insulation Best For 3/4" Single Cell Blackout Full blackout Cells plus a metallic liner Bedrooms, nurseries, media rooms 1/2" Double Cell Blackout Full blackout Two layers of cells plus a sealed film Street-facing bedrooms, drafty windows 3/4" Single Cell Light Filtering Soft filtered light One layer of insulating cells Living rooms, kitchens, offices 1/2" Double Cell Light Filtering (this shade) Soft filtered light Two layers of cells Sunrooms, family rooms, older windows The same 1/2" double cell light filtering fabric is also available as a skylight shade and as a vertical cellular shade for sliding doors, so a bedroom window, its skylight and the patio door can all match. Sizing, Fit & Installation Width: 9" minimum to 144" maximum. Shades over 120" are made as two shades on one headrail. Height: 9" minimum to 86" maximum with cordless or top-down/bottom-up lift, up to 144" with a continuous cord loop. Headrail: 1 9/16" high by 2 3/8" deep, aluminum, color-coordinated to the fabric. Inside mount depth: 5/8" minimum for a partially recessed fit, 2 5/8" for a fully flush fit. Outside mount has no depth requirement. Factory deduction: Inside mounts are reduced by 3/8" overall for smooth operation. Outside mounts are made to your exact size. New to measuring? Our measuring guide walks through inside and outside mounts step by step, and the full specifications are listed below. Easy Care Dust regularly with a soft cloth or the brush attachment of a vacuum on low. Spot clean surface dirt with a soft sponge, mild detergent and warm water. Dry cleaning is not recommended. Custom-Made and Factory-Direct Since 1993 For more than 30 years, Factory Direct Blinds has made custom window treatments and shipped them straight to your door, without the showroom markup. Every order includes: MeasureSafe™ Guarantee: Add MeasureSafe™ at checkout and if you mismeasure, we will remake your shades free. You only cover shipping. Free Shipping: Ships free anywhere in the 48 contiguous United States. Free Samples: See the color in your own light before you order. Not sure which color? Order free samples, hold them up to the window, then configure your custom size above.