Silver Grey, Natural Slate Veneer – Opaque

White River Hardwoods · LuxeStone Collection LuxeStone Silver Grey Natural Slate Stone Veneer · Opaque · Interior & Exterior 100% natural slate in cool silver, charcoal, and soft grey tones. A refined contemporary surface that brings authentic stone texture and lasting character to feature walls, fireplaces, facades, and beyond. Cool, composed, and entirely natural — the quiet authority of real stone in a contemporary palette. Available Sizes Format Options Dimensions Best For Use 94¼" L × 47¼" W Large feature walls, open facades, commercial installations Interior / Exterior 48" L × 24" W Accent walls, fireplace surrounds, kitchen backsplashes Interior / Exterior 24" L × 12" W Smaller accents, bath walls, column detail work — also available as Stick & Go Interior / Exterior 11" L × 4" W Sample evaluation, detail fills, trim applications Interior / Exterior * Larger panels reduce visible seams and provide a more cohesive surface for both residential and commercial installations. SKUs: LXST-SG-9447 · LXST-SG-4824 · LXST-SG-2412 · LXST-SG-1104 Why This Material The Stone in Detail 100% Natural Slate LuxeStone Silver Grey is genuine natural slate — not manufactured composite or faux stone. The palette of cool silver, charcoal, and soft grey delivers a refined contemporary character that only real stone can provide, with natural variation from panel to panel. Interior & Exterior Rated Moisture-resistant slate construction makes LuxeStone Silver Grey suitable for wet interior areas including kitchen backsplashes, shower walls, and bathrooms, as well as exterior facades and outdoor features exposed to weather and UV. Durable, Low Maintenance Natural slate resists scratches, staining, and moisture. Easy to clean with soap and water, with periodic sealing to enhance longevity — a practical, long-term choice for high-traffic residential and commercial installations. Larger Panels, Fewer Seams Available in sizes up to 94¼" × 47¼", the larger formats minimize visible seams across the installation — delivering a more cohesive, polished result for both residential renovations and large-scale commercial builds. Technical Specifications Key Facts Material 100% Natural Slate Finish Opaque Colorway Silver Grey — Cool Silver, Charcoal & Soft Grey Panel Sizes 94¼"×47¼", 48"×24", 24"×12", 11"×4" Installation Adhesive (Trowel or Gun) · Stick & Go (12"×24") Use Interior & Exterior Moisture Resistance Yes — Suitable for Wet Areas Applications Walls, Fireplaces, Backsplashes, Facades, Spas Maintenance Soap & Water; Periodic Sealing Before You Install Surface Preparation Clean, Sound, and Primed The wall surface must be clean, dry, and free of dust, grease, or debris before installation. Apply a primer to porous or absorbent substrates to improve adhesion and ensure the panels bond properly. Allow primer to cure fully before proceeding. For exterior applications, use an exterior-rated adhesive. 12" × 24" Format Stick & Go Installation Self-Adhesive — No Extra Adhesive Required The 12" × 24" Silver Grey panels are available in a Stick & Go format with pre-applied adhesive backing. Peel the backing, position the panel on a clean dry surface, and press firmly across the full face. Use a level to confirm alignment before the adhesive sets. Ideal for fast renovations, DIY installations, and smaller accent areas. Installation Step by Step — Larger Panels 1 Prepare the Surface Clean and dry the wall thoroughly. Apply primer if working on a porous substrate to ensure maximum adhesion before laying any panels. 2 Dry-Fit First Always dry-fit panels before committing adhesive. Confirm your layout and panel orientation — especially important on larger installations to ensure consistent seam spacing and stone pattern flow. 3 Apply Adhesive Using a trowel, apply an even, consistent layer of adhesive to the back of each panel. Aim for 80–100% coverage to within ½" of the panel edges to prevent edge lifting. 4 Position and Press Set the panel against the wall and press firmly across the full surface. Use a level to confirm alignment before the adhesive begins to set. Work from a fixed reference point outward. 5 Seal the Seams After all panels are set and adhesive has cured, apply a quality stone sealer to seams and exposed edges. This enhances durability and guards against moisture infiltration over time. 6 Clean Up Remove any adhesive squeeze-out immediately before it cures. Clean panel faces with a damp cloth — avoid abrasive cleaners that could dull the slate surface. Installer Advice Pro Tips Larger Panels First Begin with your largest format panels to establish the primary visual field. Fill edges and detail areas with smaller sizes — this minimizes cut waste and keeps seams visually consistent across the installation. Seal Exterior Installations For outdoor or exposed applications, apply a penetrating stone sealer before final installation and reseal annually. This preserves the cool silver tone and protects against weathering over time. Wet Areas — Allow Full Cure In showers, bathrooms, or kitchens near water, allow the adhesive to cure fully — typically 24–48 hours — before exposing the installation to moisture or steam. Care & Maintenance Clean LuxeStone Silver Grey with mild soap and water. Avoid harsh chemical cleaners or abrasive pads that may dull the slate finish. For exterior installations or wet interior areas, reseal periodically with a quality penetrating stone sealer — typically every one to two years, or when water no longer beads on the surface. Proper surface preparation and adhesive application are required to maintain installation integrity. LuxeStone Silver Grey — the cool authority of natural stone, refined for the contemporary specification.