Pesado V2 HD High Diffusion Shower Screen - Breville 58mm | Dual Boiler & Oracle

Two Problems, One Kit Breville's 58mm grouphead has an additional component that the 54mm range doesn't - a plastic diffusion plate sitting directly behind the shower screen. This plate receives near-boiling water under pressure on every shot. Over time it warps and degrades, compounding the uneven distribution already caused by the mesh shower screen. Most grouphead upgrades only replace the shower screen and leave the plastic diffusion plate in place. The Pesado HD V2 58mm set addresses both components - a 18-channel stainless steel shower screen and a fully redesigned 100% stainless steel diffusion plate replace every plastic and mesh component in the water distribution system. What's New in the V2 The V2 diffusion plate has been redesigned with reduced weight and thickness compared to the original. This gives more headroom clearance inside the grouphead - important for Oracle and Dual Boiler owners who use automatic dosing, where machines tend to fill baskets generously. The additional clearance means the screen no longer presses into the puck before extraction begins. The V2 set is also now compatible with both single and double shot baskets. The included 0.2mm contact mesh adds a further layer of diffusion and prevents grounds pushing up into the channels, reducing cleaning frequency. What's in the Box 1 x 58.35mm HD High Diffusion Shower Screen (MV-HD) 1 x 100% Stainless Steel Diffusion Plate 1 x 0.2mm Contact Mesh + Pin You will need your existing shower screen bolt to install - not included. Specs Material: 304 Stainless Steel Shower screen diameter: 58.35mm Shower screen thickness: 3mm Diffusion plate outer thickness: 5.4mm Diffusion plate inner thickness: 2.4mm Diffusion plate diameter: 57.5mm Channels: 18 Basket compatibility: Single and double shot baskets Compatible with Breville 58mm grouphead machines: Dual Boiler (BES920) Oracle (BES980) Oracle Touch (BES990) Not compatible with the Oracle Jet. If you have an Oracle Jet, this set will not fit your machine currently due to the screw profile. Compatible with both single and double shot baskets. Have a Breville 54mm machine (Bambino, Barista Express, Barista Pro, Barista Touch)? You need the 54mm BR54HD screen instead.