VW/Cupra/Audi/Seat/Skoda Compatible V2L (Vehicle to Load) | Discharge Cable

A Simple Adapter Power Source (VW/Cupra/Audi/Seat/Skoda Only) Turn your Audi Q4 e-tron and Q4 Sportback e-tron; Cupra Born, Raval and Tavascan; Skoda Elroq, Enyaq, Enyaq Coupé, Epiq and more; Volkswagen ID. Buzz, ID. Cross, ID. Polo, ID. Polo GTI and more into a mobile power source for home appliances with our (V2L) Vehicle to Load (sometimes known as Vehicle to Device (V2D)) EV cables. V2L is available for all ID. models with updated ID. software version 6. Simply plug into your Type 2 charge port and use the push button on the Type 2 connector to toggle the V2L function on and off. Connect up to 3kW (UK 3 pin) or 3.6kW (CEE and Schuko) of load (Depending on car model) Power camping equipment in the wilderness! Vehicle to load cables should not be connected to any other electrical system as there is no voltage or phase synchronisation. Failing to adhere to this will void your vehicle warranty and has the potential to cause serious damage to both the connected system and your vehicle * What is IP44 Rating? The IP44 (Ingress Protection Rating) means our cables will operate in dusty conditions, and will resist splashes of water while mated. However, the charging process is not fully water sealed and the cables should not be submerged in water. Cable Information 16A, 3G1.5, 10.5mm diameter Charging Cable Safety The cable should be kept out of puddles but can be kept outside. Please remember to use the rubber dust cover to keep debris from collecting in the connector when not in use. Moisture is the most common issue experienced and will lead to corrosion of the pins which are not covered by our warranty. Risks of charging in the rain? Water can still get into the plug and charging socket during the inserting and removing of the plug from the car. In fact, as soon as you open the charge port or unplug your car, the rain will get onto the pins and stay there until the next time you charge.