Zeliox NEO & ZCM6 8m High-Flex Cable Kit – 70mm²

A complete pre-terminated cable kit for Zeliox NEO and ZCM6 installations requiring an approximately 8-metre vehicle supply run. The long positive and negative runs use heavy-duty 70mm² high-flex cable, helping minimise voltage drop between the vehicle supply and the rear-mounted Zeliox NEO. The separate 16mm² ZCM6 circuit is supplied with prepared WAGO ends for straightforward installation. Both circuits are protected by serviceable MEGA fuses instead of resettable DC breakers. Kit contents Alternator input circuit 7.5m red 70mm² positive cable 0.5m red 70mm² positive jumper 8.0m black 70mm² negative-return cable Anderson contacts fitted to one end of the long red and black cables Ring terminals fitted to all remaining ends Heavy-duty covered MEGA fuse holder 150A MEGA fuse ZCM6 12V output circuit 0.5m red 16mm² positive cable 1.5m red 16mm² positive cable 2.0m black 16mm² negative-return cable Longer red and black cables prepared with approximately 15mm of bare copper for the ZCM6 WAGO terminals Ring terminals fitted to all remaining ends Heavy-duty covered MEGA fuse holder 100A MEGA fuse Key features Heavy-duty 70mm² cable for the extended alternator run Quality high-flex copper cable Professionally crimped connections Adhesive heat-shrink on ring-terminal connections Correctly prepared Anderson and WAGO ends Dedicated positive and negative cables MEGA fuse protection for both circuits No resettable DC breakers Always confirm the required cable route, vehicle connection points and terminal arrangement before installation.