Sonorous Objects In-Ear Stereo Microphones PREORDER SALE
Sonorous Objects In-Ear Microphones provide highly immersive 3D sound in a small discreet form factor. These microphones are provided as a matched stereo pair and sit just outside of your ears - just as you wear earbuds and AirPods. In this format, the microphones are located close to your ear, the sound captured is richly realistic and similar to how we hear. These in-ear mics also allow a level of inconspicuity that traditional microphones do not due to the ubiquity of the in-ear headphones. Offered in EM272 and EM258 variants, our in-ear mics have the same highly sensitive, low noise, and detailed nuanced sound as our other microphones. Our in-ear mics, together with the array on either side of your head, provide a breathtakingly realistic spatial image and deep soundstage. The SO In-Ear Microphones utilize Primo's highly regarded EM272 / EM258 capsule, favorites among field recordists, sound designers, location sound, and artists working with sound. The Microphone design allows for the addition of foam windscreens (included), or furry windscreens to aid in reducing wind noise. The microphones are housed in a plastic enclosure produced and fabricated here in NYC. We use high quality Mogami shielded cable that terminates in a Neutrik Gold Right Angle 3.5mm plug. Overall length from microphone to termination is 4 1/2 ft. Microphones can connect directly to phone! No recorder needed if using SO USB-C Audio Interface for 3.5mm Cables by Saramonic Sonorous Objects In-Ear Microphones are fabricated in-house and is assembled by hand in NYC Shipping Begins 9/1/2026 What's Included (1) In Ear Stereo Matched Microphone Set (2) Foam Windscreen Interchangeable Ear Tips : (2) Single Flange Small Rubber Ear Tip (2) Single Flange Medium Rubber Ear Tip (2) Single Flange Large Rubber Ear Tip (2) Triple Flange Medium Rubber Ear Tip Features - Exceptional low self noise and high sensitivity - Microphones can connect directly to phone! No recorder needed if using SO USB-C Audio Interface for 3.5mm Cables by Saramonic - Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum - Highly immersive 3D sound in small discreet in-ear form factor - Multiple (S,M,L Single Flange + Triple Flange Medium) Ear Tips Included - Industry Standard High Quality Components and Parts used. Neutrik Gold Pin Connectors, Mogami Shielded Cable - Fabricated in house by hand in NYC. In-Ear SO.1 EM272 Specifications Capsule | Primo EM272 Polar Pattern | Omnidirectional Frequency Response | 20hz - 20khz. (Spectrograms show extended range) Signal to Noise Ratio | 80dB Self Noise | 14dBA Maximum Input SPL | 122dB Dynamic Range | 108dB Sensitivity | -28dB (+/- 3.0dB @ 1kHz) Stereo Pairs are matched within 0.3dB @ 1kHz Operating Voltage | 3.5mm Plug In Power Enclosure | Black PLA Plastic Dimensions | 19mm Length x 11mm Diameter Operating Temperature Range | -20°C ~ +60°C Storage Temperature Range | -40°C ~ +85°C Cable | Shielded, Mogami, 18" from microphone to splitter, 3 ft length braided Mogami cable terminated with a Neutrik Gold Right Angle 3.5mm TRS Plug. 4.5 ft total length. In-Ear SO.4 EM258 Specifications Capsule | Primo EM258 Polar Pattern | Omnidirectional Frequency Response | 20 Hz - 70 kHz Signal to Noise Ratio | 74dB Self Noise | 20dBA Maximum Input SPL | 115dB Dynamic Range | 95dB Sensitivity | -32dB (+/- 3.0dB @ 1kHz) Stereo Pairs are matched within 0.3dB @ 1kHz Operating Voltage | 3.5mm Plug In Power Enclosure | Black PLA Plastic Dimensions | 19mm Length x 11mm Diameter Operating Temperature Range | -20°C ~ +60°C Storage Temperature Range | -40°C ~ +85°C Cable | Shielded, Mogami, 18" from microphone to splitter, 3 ft length braided Mogami cable terminated with a Neutrik Gold Right Angle 3.5mm TRS Plug. 4.5 ft total length.