Sikalastic®-394 | UV-Stable Polyurethane Topcoat for Traffic Decks

Sikalastic®-394 | UV-Stable Polyurethane Topcoat for Traffic DecksUV-Stable Aliphatic Polyurethane Topcoat | Brand: SikaSikalastic®-394 is a UV-stable, aliphatic polyurethane topcoat that forms the colour-stable wearing surface of the Sikalastic®-3900 Traffic System. Applied over the Sikalastic®-391 N wear course, it seals the system and provides a UV-stable finish. Confirm colour options, coverage, cure time and skid-resistance requirements against the current Sika TDS, SDS and project specification before use. Sikalastic®-3900 Traffic System component: the UV-stable topcoat and sealing layer, applied over the Sikalastic®-391 N wear course. Confirm the full system build-up and colour selection against the current Sika system specification.Key Characteristics Aliphatic polyurethane formulated for UV and colour stability; confirm against the TDS. Seals the wear course and provides the finished wearing surface. Confirm coverage rate and number of coats against the current TDS. Confirm skid-resistance build (aggregate, if specified) against the TDS and project specification. Typical Applications UV-stable topcoat for exposed vehicular and pedestrian traffic decks Parkade top decks, ramps and exposed podium decks within the Sikalastic®-3900 system Limitations Must be applied over the approved wear course within the Sika system. Confirm recoat window and topcoat compatibility against the TDS. Colour and gloss may change over time under UV and traffic — confirm expectations against the TDS. Purchasing Note: All sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, system compatibility, substrate condition, pickup timing and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.Canopus Supply Inc. — Sika Products · Pickup in North Vancouver; ships across Canada and the USATechnical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time, system compatibility and final performance remain the responsibility of the purchaser, installer, project specifier and/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.