ULTRA MFT Table Builder

Custom MFT Table Builder Build your complete made-to-measure MFT table for woodworking, track-saw cutting and assembly. Our interactive Custom MFT Table Builder guides you through three connected stages: the supporting aluminium frame, a precision-machined MFT top and an adjustable-height base. Configure the finished dimensions, structural supports, MFT hole pattern, top material, working height and floor supports. Choose lockable castor wheels for a mobile MFT workbench or adjustable feet for a stable workshop installation. The builder calculates the required components, approximate weight and VAT-inclusive price automatically, making it suitable for professional workshops, independent woodworkers and home woodworking enthusiasts. 1. Build your ULTRA aluminium frame Your table begins with a rigid supporting frame manufactured from 8040 aluminium extrusion. The profile is positioned with its 80 mm section vertically, producing a strong foundation that helps the MFT top remain flat and accurate during workshop use. Enter the required finished length and width. The Frame Builder calculates the correct extrusion lengths and recommends the appropriate number of structural supports. Frame options Finished frame length and width Recommended structural mid supports Corner Blox connection system Individual rail machining Optional matching MFT top Optional complete supporting base Calculated mid supports The builder automatically recommends mid supports based on the entered dimensions. Each support is cut to the correct internal frame width, positioned evenly, machined for quick-connect fixings and included in the configured price. These supports reduce the unsupported area beneath the MFT top and help minimise sagging or loss of flatness. A recommended support can be removed if your installation already provides suitable support; a warning will appear where removing it could affect long-term stability. Support spacing designed to reduce sagging The position and number of structural supports used in the ULTRA MFT Table Builder are based on a study of unsupported spans across different table sizes. The assessment considered the dimensions of the MFT top, the frame construction and the effect of typical workshop loads over time. Using these findings, the Table Builder automatically determines when additional supports are required and positions them to reduce unsupported areas beneath the MFT top. This helps minimise deflection and long-term sagging while creating a rigid, stable working surface. Because the supports are calculated from the dimensions entered, larger tables receive the additional reinforcement they need without adding unnecessary components to smaller configurations. Corner Blox connection system Corner Blox are selected by default and provide strong, accurately positioned frame joints. They include the required M12 bolts and are automatically accounted for when the extrusion lengths are calculated. A TX50 driver or driver bit with a reach of at least 50 mm is required for assembly. You can remove the Corner Blox option if you intend to provide your own suitable connection system; the extrusion lengths will adjust automatically. Individual rail machining Machined slots can be selected independently for Long Side 1, Long Side 2, End 1 and End 2. Each selected rail costs £15 to machine. The slots can accommodate clamps underneath the frame and sliding nuts along the upper face. 2. Add a matching Custom MFT Top Select MFT Top required to add a made-to-measure top. Its dimensions are taken directly from the frame configuration, helping to prevent sizing errors. MFT top options Medite MR MDF 18 mm or Fibralux MR Black 18 mm Standard MFT hole pattern or Quad and Fence holes Delivery or collection One-piece or split construction where required Optional recessed cutting strip Available cutting-strip positions Four corner counterbore fixing holes for attaching the top to the ULTRA frame are included automatically at no additional cost. MFT hole patterns Standard MFT provides the regular 96 mm grid of 20 mm dog holes. Quad and Fence holes add the mounting holes required for easy installation of the Quad Hinge system. The Fence holes position the fence at the optimum distance from the hinge system, maximising the available cutting width. Cutting-strip option An optional mint-green cutting strip can be added. The strip is 80 mm wide and recessed 8 mm into the top. Select from the available positions shown in the builder. Where a top needs to be split for delivery, the system positions the panel joints and joining-plate fixings away from the cutting-strip area to maintain suitable strength. 3. Add your adjustable-height base Select Base required to turn the frame and MFT top into a complete freestanding woodworking workbench. The base is manufactured from rigid 4040 aluminium extrusion and calculated automatically from the frame dimensions. Enter your required finished working height, measured from the floor to the upper surface of the MFT top. Base and floor-support options Finished working height from 700–1100 mm Lockable castor wheels for a mobile MFT table Adjustable feet for a stationary installation Automatically calculated legs and braces Additional mid legs where required Lockable castors Select lockable castors if you need to move the table around your workshop. Their height is included when calculating the leg lengths so the completed table reaches your selected working height. Adjustable feet Select adjustable feet for a stable stationary installation. They provide additional levelling and height adjustment of up to approximately 75 mm, helping to compensate for uneven workshop floors. Additional mid legs Longer tables require additional central support. Where necessary, the builder automatically adds two mid legs, mid-leg brackets, required fixings, extra castors or feet, split side braces and a front-to-back central brace. These components are included in the calculated base price and weight. Clear individual and combined pricing The builder displays separate prices for the ULTRA frame, Custom MFT top and supporting base, along with the combined price for the complete configured table. The frame, top and base remain separate configured items in the cart so that all manufacturing specifications, weights and workshop information are recorded correctly. Displayed product prices include VAT; shipping is calculated separately. Finished-size range Length: 1000–2900 mm Width: 600–1200 mm Finished working height with a base: 700–1100 mm Dimensions must be entered in whole millimetres Manufactured for your woodworking project Every ULTRA MFT table is manufactured to order using the measurements and options you provide. Before ordering, check the finished dimensions and working height, recommended supports, connection system, machining requirements, MFT top material and hole pattern, cutting-strip selection, floor supports and delivery or collection requirements. Special requirements can be entered in the Order Notes field. Our team will review them before manufacture, although special requests cannot always be guaranteed. Shipping and collection Shipping is calculated separately according to packed dimensions, weight and destination. Large frames, MFT tops and complete table systems may require specialist delivery. Please contact us before ordering if you have unusual access requirements or require delivery outside our standard service area.