Magnex Studio LN - EU - 1984 The Magnex Studio LN shell design closely mirrors early‑1980s JVC cassettes, particularly the 1983 JVC Dynarec ME90P. The squared shell geometry, window proportions, and minimalist label layout strongly reflect JVC’s early‑80s industrial design language. This suggests Magnex adopted contemporary Japanese styling cues, a common trend among European manufacturers during the mid‑1980s. Made in ITALY! Note 1: 60 Minutes: 100% Box-fresh cassettes. There are a few available. Note 2: Optional Repair Service: Read about this unique service at the bottom of this page. Quality Checks: These tapes were built with unusually high manufacturing precision. 1. Pressure pads are firmly mounted with no looseness. 2. Labels show no glue bleed and still adhere cleanly after 40+ years. 3. Tape is glossy and smooth; pancakes are even and consistent, a hallmark of accurate production. 4. Shells use four screws, not ultrasonic welding. 5. Recording performance not yet tested. 6. Recommendation before using this tape: *** Read this paragraph at the bottom of this page. ABOUT MAGNEX: Magnex was an Italian cassette manufacturer based in Garlasco, Lombardy, Italy, active from the late 1970s through the mid‑1990s. Known for high‑quality shells and reliable ferric formulations, Magnex produced both branded and OEM tapes for European distributors. The Studio LN series reflects early‑1980s Japanese design influence, aligning with a 1984 production date. Magnex had no connection to Audio Magnetics of Switzerland. Production declined after 1994, and the brand ultimately disappeared. Magnex Studio LN - 1984 - EU - Made in ITALY ----------------------------------------------------------------------------------------------------------------- 6. Recommendation before using this tape: (***) Please read... Issue Problem: A split in the cassette hub clip that holds the leader tape was noticed on the one randomly chosen tape to show you pictures of, on this listing. Are they all like that? Maybe yes, maybe no, but I suspect there will more. Just in case yours has this problem, here are some suggestions to keep these awesome tapes good for another 43+ years... Repair Instructions Open the Cassette: Remove the four screws. Carefully pry the shells apart, starting from the top and moving down the sides, until you feel a gentle snap. Apply Glue: Pull the hub just outside the cassette (keeping the leader tape attached) and apply a tiny drop of super glue (e.g., "Crazy Glue") over the split clip. Leave it alone and let it dry overnight. Do not try to remove any excess glue at this stage. Leave the hub over some plastic or metallic surface. Try to not use paper, cardboard may be ok to use. Trim Excess: The following day, carefully remove any dried excess glue with a sharp razor knife over the split, if necessary. Reassemble: Put all the components back together to restore the tape. Note 2: Optional Repair Service: * Fee: $2.00 USD per batch of 1–5 tapes (e.g., 1–5 tapes = $2.00; 6–10 tapes = $4.00, etc.). * Materials Fee Note: This minimal fee simply covers the single-use adhesive required for each batch, as tubes cannot be stored once opened. * Packaging Notice: To complete the repair, outer wrappers will be neatly scored open along the edge and left attached to the case. You may keep or remove them upon arrival. Our Customer Service Pledge: At Cassette Comeback, clarity drives every listing. We provide precise, tape-specific condition reports alongside individual high-resolution photos for each item, eliminating the guesswork often found elsewhere. It’s a straightforward approach designed to give you total confidence in your selection.