Toyota RAV4 HVAC AC Air Conditioner Temperature Knob Extension Covers (5th Generation 2019-2025) *Free Shipping*

Description - Increased ergonomics. Easy grab and spin even with thick gloves on. - Rugged aesthetics. - Secured via 3x locking screws per knob. - Comes as a set of 2. What's Included - 2x 3D Printed HVAC Knobs for the 5th Generation Toyota RAV4 Specifications - Material: PLA+ (Polylactic Acid Polymer) - Finish: Black/White/Blue/Red/Gray/Custom *Gray Option would be a darker shade compared to the stock trim* - Weight: 0.7oz (19g) - 3D Printed Resolution: 0.008" (0.2mm) - **This is a 3D Printed part, it was constructed via layers of melted plastic. Minor imperfection such as layer lines and start/end seams are to be expected. The part was fully inspected and guaranteed to function as intended. See image attached** What you will need - 5/64" Allen Wrench Installation Instructions 1. Loosen the 3x Screws on the Knob Extensions. (Screws are snug tight when shipped) 2. Fit the Knob Extensions snuggly on the stock Knobs. Extensions should easily fit over the stock Knobs. If the Extensions don't fit easily, further loosen the 3x Screws. 3. Slowly snug tight the 3x Locking Screws one at a time until the Knob Extensions are secured. ***Do not over tighten! Doing so will damage the surface of the Stock Knobs*** 4. Reverse steps to remove Knob Extensions. ***Do not attempt to pull off Knob Extensions before first loosening all 3x Locking Screws. Doing so will damage the surface of the Stock Knobs*** - Free USPS First Class Shipping to US (2-3 Business Days with Tracking) - Free Canada Post Letter Mail Shipping (5-7 Business Days without Tracking) **Premium Canadian Shipping available upon request email: cay(at)createdbycay.com ** Video Coming Soon **